Конвертер флешей DIV в UFS - есть или нет?

[nester]

Гдето вроде читал или видел... Есть такая штука или нет?

[dms-3000]

DIV2UFS BIS files generator v1.2 //SFlood

Designed to convert .sbn and .arm files for DIV / DIVUSB software to .bis UFS-2 format.
Run without parameters to get help.
Notes:
1. Modem .arm files need no conversion - just rename .arm to .bih or use internal copier.
BT/PDA flashes for Px00 are not used by DIV so can't be supported by this converter.
2. T100/Z200/A3618 ... etc .arm files are needed to be converted.
R600 .arm files are not supported!
Since .bis format doesn't support multi flashing sections in one file, multipart .arm
files will be splitted to several .bis files with "-partx" added to filename.
For example for Z200: part1 - main MCU part, part2 - mcu fix part and part3 - sysparam part.
3. GDFS files are not supported because UFS-2 uses different method of accessing GDFS than DIV.
For sure, "GDFS in AVR format" files could be processed as usual .sbn files.

Play with this with some care, wrong conversion could produce wrong files and destroy your phones.
Software provided AS IS, no help, no support, no responsibility.

Version history:

1.2
Minor feature: now converter supports copying Modem ARM files to bih.
This just copies file changing its ext. to ".bih", but source
file will be checked for valid startaddress/size before conversion.
Minor fix: SBN conversion - fixed adding extra 1KB to target file if no padding is needed.
Minor fix: SBN conversion - padding data block size reduced from 2KB to 1KB.

1.1
Major fix: added padding data to integer number of 2Kb blocks for SBN conversion.

1.0
Initial release.

//SFlood

Конвертор работает только с незакриптованными файлами, то есть со старыми версиями которые не имеют в конце названия буквы типа _c _e _g и т.д.

[nester]

Спасибо за информацию, пошол искать )

[smail]

Если найдешь-скажи где.У меня пока поиск безрезультата!