i9103 на данном способе висит на waiting for bootloader to initialize.
Что делать?
Заранее спасибо
Кидаю логи, дабы для подстраховки:
Код:
Current BCT: 300MHz_Jun21_2.bct
(!)Note: Set the target on the RECOVERY mode.
Type the number you want: 1
Flashing fastboot image...
Nvflash started
rcm version 0X20001
System Information:
chip name: unknown
chip id: 0x20 major: 1 minor: 3
chip sku: 0xf
chip uid: 0x042800c841600517
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: emmc
operating mode: 3
device config strap: 0
device config fuse: 17
sdram config strap: 0
sending file: 300MHz_Jun21_2.bct
- 4080/4080 bytes sent
300MHz_Jun21_2.bct sent successfully
odm data: 0x100c0105
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: bootloader.bin
| 4069632/4069632 bytes sent
bootloader.bin sent successfully
waiting for bootloader to initialize