Привет попал аппарат по словам просто сам по себе перегрузился и вот виситна заставке пару раз он загрузился до рабочего стола но очень долго 3-4 мин и после белый лсд и всё на этом .Прошился норм Дальше жду советов
Нашел похожую темку вот..Код:Core : v1.42 , FlashEngine : v1.25 Selected FlashSettings : Check FlashFiles, Please, wait... Files Set for Flashing : MCU : RM-505_22.0.110_prd.core.C00 PPM : RM-505_22.0.110_prd.rofs2.V11 PPM2 : RM-505_22.0.110_C01_prd.rofs3.fpsx CNT : RM505_507_22.0.110_uda_3_001.uda.fpsx APE : RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Flashing phone now... Check files done... -> SWversion check skipped : Dead mode selected Dead Mode is Selected Waiting for USB device... --- Press phone's power button or insert cable & charger! --- Connection opened successfully Waiting for communication response... BootRom : 1st boot ok ASIC ID: 000000010000022600010006400C192101031103 CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB EM0 ID: 00000296 EM1 ID: 00000B22 PUBLIC ID: 1D00010CC6800052F1C33E752CA02D7EBF8F0CBA ASIC MODE ID: 00 ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE ROM ID: 4B9B75103E691FF8 PatchRAWLoader: Patched OK Processing RAWLOADER... Processing RAP3NAND ... Processing PASUBTOC ... Processing PAPUBKEYS... Processing UPDAPP ... Boot Done! :) TIME : Boot time : 00:00:04 Reopening the connection... Waiting for response: 30 Waiting for response: 29 ADL -> [2nd] changing... ADL Server confirm flashmode! ADL : Auth done... ADL : ASIC CMT select Ok ===Flashing [MCU]=== Erase : Processing RM-505_22.0.110_prd.core.C00 Found 4 areas to erase Erasing area 0x00040000 - 0x00082FFF, NAND, CMT Result: 0000 Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT Result: 0000 Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT Result: 0000 Erasing area 0x00D60000 - 0x0AB9FFFF, NAND, CMT Result: 0000 Erase partition 0x0A Partition erase Ok Partitioning : Ok [5] TIME : Erase time : 00:00:01 Write : Processing RM-505_22.0.110_prd.core.C00 Total 477 [477/0/0] blocks to write, writing... CMT : Writing Hash CERT [ADA] CMT : Writing Hash CERT [KEYS] CMT : Writing Hash CERT [PRIMAPP] CMT : Writing Hash CERT [RAP3NAND] CMT : Writing Hash CERT [PASUBTOC] CMT : Writing Hash CERT [PAPUBKEYS] CMT : Writing Hash CERT [SOS*UPDAPP] CMT : Writing Hash CERT [SOS*DSP0] CMT : Writing Hash CERT [SOS*ISASW] CMT : Writing Hash CERT [SOS+CORE] CMT : Writing Hash CERT [SOS+ROFS1] TIME : Write time : 00:00:42 MCU Write done ===Flashing [PPM]=== Erase : Processing RM-505_22.0.110_prd.rofs2.V11 Found 1 areas to erase Erasing area 0x079A0000 - 0x09C9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_prd.rofs2.V11 Total 93 [93/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS2] TIME : Write time : 00:00:08 PPM Write done ===Flashing [PPM2]=== Erase : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Found 1 areas to erase Erasing area 0x09CA0000 - 0x0AB9FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM-505_22.0.110_C01_prd.rofs3.fpsx Total 6 [6/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS+ROFS3] TIME : Write time : 00:00:00 PPM Write done ===Flashing [CNT]=== Erase : Processing RM505_507_22.0.110_uda_3_001.uda.fpsx Found 1 areas to erase Erasing area 0x0ABA0000 - 0x0F71FFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM505_507_22.0.110_uda_3_001.uda.fpsx Total 36 [36/0/0] blocks to write, writing... TIME : Write time : 00:00:03 CNT Write done ===Flashing [APE]=== Erase : Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Found 1 areas to erase Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT Result: 0000 TIME : Erase time : 00:00:00 Write : Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx Total 16 [16/0/0] blocks to write, writing... CMT : Writing Hash CERT [SOS*ENO] TIME : Write time : 00:00:00 APE Write done ================= ADL : End flashing ADL : Finalize... Flashing done! Total flash time : 00:00:56 Reboot phone now... Reading Phone Info.... Connected phone - Nokia N97 Software Info: V ICPR72_09w44.18 28-05-10 RM-505 (c) Nokia IMEI: 35*********** Ape Version: v 22.0.110 Product code: 0576405 Checking... SimLock status : SimLock is Ok Security status : Security is Ok Read Info Done! Settings After Flash Defaults... ProductTuneSet...OK! SwUpgradeSet...OK! AfterFlash operations done ;D Done! Elapsed: 00:02:02 Connect phone on selected interface... Phone found! Series 60 Device detected! read info... - Ok Format File System... Operating mode is OK, no need change... Scanning FS parametres... Checking Data... Detected : 2 drive(s)... Start formating.... Using Series 60 format algorithm... ================================== Formating drive : C now... Step1 : OK Step2 : OK End format... ================================== Formating drive : D now... Step1 : OK Step2 : OK End format... ================================== Done!
http://www.mobile-files.ru/forum/sho...d.php?t=264775
Ответить с цитированием
