Nokia 6120 белый дисплей, потом синий.

**ExpleyT** · 22.04.2012, 18:28

Привет всем! Принесли тело с другой мастерской. Типа к восстановлении не подлежить. Нет реакции на кнопку вкл. Разобрал, поменял авилму и бетти, тело стал вкл. Включаешь белый дисплей потом синий. Пробовал нажать на чек mx-box om, вот такая ошибка: phone not responding, please reset the phone manually then click "ok" to continue. Сохранил NPC, erase потом пошил, и вот лог mx-box, после прошивки, даже имей 12345610654321-? :

Код:

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0851E7E
Using device: HTI, FW ver: 00.50, SN: 0000791C
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0900011828A80052FD822DA64E8793CEB3895BCD
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.50.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: FFFF FFFF  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0030  - 0000 0321 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 11.50.0 revision: 2.0 size: 0x8B45D
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS is blank/erased.
Processing MCU file: rm243_07.20_prd_core.fpsx 
 [BB5,XSR 1.5]  size: 43.63 MB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
Storing certificate [NPC, CCC, HWC, R&D] ...OK
Partitioning ...OK
Erase size: 74.81 MB
CMT FLASH,MuxOneNAND area [00040000-00082FFF]
CMT FLASH,MuxOneNAND area [00083400-0087FFFF]
CMT FLASH,MuxOneNAND area [00B80000-04DFFFFF]
Formating partition ...
Prog.status for Asic CMT ...
 NAND: OK
Flash programming ...
CMT ADA block sent
CMT KEYS block sent
CMT PRIMAPP block sent
CMT RAP3NAND block sent
CMT PASUBTOC block sent
Selecting first CMT PAPUB block with matching RootKey.
CMT PAPUBKEYS: 0FE1BA92 [RAP Certificate 68 v1] sent
CMT SOS*UPDAPP block sent
CMT SOS*DSP0 block sent
CMT SOS*ISASW block sent
CMT SOS*CORE block sent
CMT SOS+ROFS block sent
Prog.status for Asic CMT ...
 NAND: OK
Programming completed in 2 min 4.063 s
Processing PPM file: rm243_07.20_prd_vB05_01_russian.fpsx 
 [BB5,XSR 1.5]  size: 23.76 MB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
Erase size: 27 MB
CMT FLASH,MuxOneNAND area [03300000-04DFFFFF]
Prog.status for Asic CMT ...
 NAND: OK
Flash programming ...
CMT SOS+ROFX block sent
Prog.status for Asic CMT ...
 NAND: OK
Programming completed in 1 min 11.219 s
Processing CNT file: rm243_07.20_prd_UDA_Nokia_Noir.fpsx 
 [BB5,XSR 1.5]  size: 111.26 KB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105
Erase size: 45.25 MB
CMT FLASH,MuxOneNAND area [04E00000-07B3FFFF]
Prog.status for Asic CMT ...
 NAND: OK
Flash programming ...
Prog.status for Asic CMT ...
 NAND: OK
Programming completed in 0.984 s
Processing CNT file: rm243_ENO_A_2009wk15v0.100.fpsx 
 [BB5,XSR 1.5]  size: 1.41 MB
 Supported Ids: 4003192101002003, 400C192101002003, 0003192101002003, 000C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101011105, 400C192101011105, 4003192101021105, 400C192101021105, 400C192101031105, 4003192101031105, 4003192101031103, 400C192101031103, 4003192101051103, 400C192101051103, 4003192101051105, 400C192101051105
Erase size: 3 MB
CMT FLASH,MuxOneNAND area [00880000-00B7FFFF]
Prog.status for Asic CMT ...
 NAND: OK
Flash programming ...
CMT SOS*ENO block sent
Prog.status for Asic CMT ...
 NAND: OK
Programming completed in 4.375 s
Total time for flashing process(boot+erase+write) was 3 min 33.656 s
 
 
Phone type: RM-243 (Nokia 6120)
SW version: V 07.20 05-10-09 RM-243 (c) Nokia 
ApeCoreSw: 07.20
Imei plain: 12345610654321-?
Battery voltage: 4711 mV, current: 0 mA
Language Pack:
- not available.

SLPA ver[1]: PA_SL (15 digit NCK)
 
SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SECURITY_TEST passed
 
 
Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

Помогите пожалуйста, заранее блогадарен!

**r3an1mat0r** · 22.04.2012, 18:38

у вас в логе все написано. Учитесь пользоваться боксами.Если забить в поиск то данная тема разжевана до невозможного

**serge.v** · 22.04.2012, 19:44

чего тут не понятно?! бокс пишет,что та инвалид....

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SECURITY_TEST passed

Imei plain is invalid !!!
SIMLOCK_DATA corrupted!
SIMLOCK_DATA corrupted!

**DJ_TON** · 22.04.2012, 19:48

Заказ РПЛ, если после записи бэкапа NPC имей остаётся 1234.....

**ExpleyT** · 22.04.2012, 19:53

все я поправил, вот лог:

Код:

Phone type: RM-243 (Nokia 6120)
SW version: V 07.20 05-10-09 RM-243 (c) Nokia 
ApeCoreSw: 07.20
Imei plain: 35431504863201-6
Battery voltage: 4766 mV, current: 0 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SECURITY_TEST failed!
 
 
Imei net: 354315048632016
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
 
Latest software release for Nokia 6120 classic is 7.20

ни как не могу вылечить SECURITY_TEST failed! Пробовал Pm через Sx4, без толку.

**DJ_TON** · 22.04.2012, 19:55

Сообщение от ExpleyT

ни как не могу вылечить SECURITY_TEST failed! Пробовал Pm через Sx4, без толку.

А лог где, где вы без толку пытаетесь?
мх-бокс SECURITY_TEST поправляет на ура!

**ExpleyT** · 22.04.2012, 20:19

вот лог:)

Код:

MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 3], SN: C0851E7E
Using device: HTI, FW ver: 00.50, SN: 0000791C
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.0.0 
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
CMT Data :
SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
EM0 ID: 00000295
EM1 ID: 00000B22
PUBLIC ID: 0900011828A80052FD822DA64E8793CEB3895BCD
ASIC MODE ID: 00
ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
ROM ID: 4B9B75103E691FF8
 SecondaryBoot: RAPIDOv11_2nd.fg [BB5]  version: 11.50.0 revision: 2.0 size: 0x3B80
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
TransmissionMode: DDR&TX2
Storage0: 0000 0000  - 0000 0000  type: RAM, asic:CMT 
Storage1: FFFF 0000  - 0000 0000  type: MMC, asic:CMT 
Storage2: 0400 0000  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage3: 0000 0001  - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT 
Storage4: 00EC 0030  - 0000 0321 [Samsung K5W1G13ACM-DJ60,1 Gbits] type: FLASH,MuxOneNAND, asic:CMT 
Suggested algorithm: XSR 1.5
 Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5]  version: 11.50.0 revision: 2.0 size: 0x8B45D
 Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
TransmissionMode: DDR&TX2
FUR: Adding Asic CMT as client OK
CMT PAPUBKEYS HASH: 0FE1BA92D924A658E4800780FA6F4868100AC947
Original Imei: 35431504863201
Original Product code: 0550022
Bluetooth ID: 942053ED8BA8
SIMLOCK PA identifier:
 [0] PA_SL2
 
Phone type: RM-243 (Nokia 6120)
SW version: V 07.20 05-10-09 RM-243 (c) Nokia 
ApeCoreSw: 07.20
Imei plain: 35431504863201-6
Battery voltage: 4601 mV, current: 0 mA
Language Pack:
- not available.

SLPA ver[2]: PA_SL2 (15 digit NCK)
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SECURITY_TEST failed!
 
 
Imei net: 354315048632016
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->MXKEY - BLADE X at host1, agent version 1.2 revision 0.3

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Retrying ...
Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Retrying ...
Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Retrying ...
Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->MXKEY - BLADE X at host1, agent version 1.2 revision 0.3

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Retrying ...
Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out
Connecting to server[main.mxkey.biz] ...Connection timed out

**DJ_TON** · 22.04.2012, 20:29

Сообщение от ExpleyT

вот лог:)

Делайте "PMM auth" или "SuperSD Auth" (одна их них должна помочь)

**ExpleyT** · 22.04.2012, 20:57

как это?объясните плизз, буду очень благодарен!

**DJ_TON** · 22.04.2012, 21:03

Сообщение от ExpleyT

как это?объясните плизз, буду очень благодарен!

Кнопочку ищите такую, там где вы sx4 авторизацию делаете.
Донгла под рукой нет, чтоб сделать скриншот. По памяти рассказываю.

**ExpleyT** · 22.04.2012, 21:08

сервер не работает походу:(

**ExpleyT** · 23.04.2012, 17:55

Когда работает то серевер mx-box а?:)

Тема: Nokia 6120 белый дисплей, потом синий.

Опции темы

Отображение

Nokia 6120 белый дисплей, потом синий.

Спасибо сказали:

Спасибо сказали:

Спасибо сказали:

Похожие темы

6120с белый экран а потом синий

5700 белый потом синий дисплей

Nokia 6120c-1 белый экран потом синий и тухнет

МС60 после включения синий дисплей, а потом белый и все

Ваши права