Способ раз:
ввсети в поле ноль изменение любого байта
(сохраните при этом родное поле 0)
после этого телефон должен вскричать Sim not present!
теперь вводим код хотлайн меню
как вычислить его здесь
www.asmax1.narod.ru/files/sagem/Sag_hotline.exe

затем в поле 231 прописываем ноль! возвращаем родное значение в поле ноль затем!
если не помогло-делаем дальше
Солюшка2
заряжаем телефон,и высовываем зарядку!
и када видит что он кричит Stop active делаем слудующие

1)бекапим данные из поля 268
2)затем вбиваем в поле 268 значение 00 00(родное значение сохранить)
3)суем в телефон симку
4)высовывем из зарядки
5)прописываем оригинальный параметр поля 268


p.s может я перевел плохо, вот оригинал


"A combination datacable and cherger ist best, but teres another trick:

When the phone is powerd off and it is charged you see the charging animaton on the screen...

Then when you stop charging, theres another animation with the text "Stop active".

During this time you can edit prom fields as if you had connected the charger to the Phone.
So...

Solution is:
A) Get the correct code (This is another story)
B) Make a backup of field 268
C) Edit field 268 to 00 00
D) Take out the battery for some seconds (to be shure :-))
E) put a SIM inside the phone
F) (Do not power on the phone) Load the battery for some seconds and take out the charger again...
G) In the display should be the animation "Stop active"
H) connect the datacable and write the original value to field 268
(During all this the message "Stop active must be visible on the display"
I) Power on the Phone. It will ask for the PIN and then be simlocked. You can enter the correct code now."

пишите граждане резалт!
еще епромину можно перелить, а потом чексумму поправить, но это только для телефонов с хотлайн меню трик с епроминой!