Эй, ребята,,,
Я получаю эту ошибку, когда я пытаюсь мигать, что P895,,

журнал

01:58.170 Connecting with <b>P895</b>
01:58.184 Switch off the handset and reconnect the cable
01:58.191 The handset should go into download mode. If it has not happen ant the handset has started booting in normal mode repeat the previous step
01:58.402 Received model - P895
01:58.408 Connected
02:00.113 Flashing firmware from <b>C:/Users/xxxxx/Desktop/DZ_LGP895AT-00-V10c-AME-YYY-NOV-07-2012+0.sbf</b>
02:01.278 File reported model: P895
02:01.888 sending preloader
02:07.001 sending ebl
02:21.838 Setting baud rate
02:22.252 Flashing partition NAND_ID_PSI_IMAGE
02:22.835 Flashing partition NAND_ID_SLB_IMAGE
02:26.932 Flashing partition NAND_ID_DSP_IMAGE
02:34.267 Flashing partition NAND_ID_CDS_IMAGE
02:48.410 Flashing partition NAND_ID_CODE_IMAGE
05:26.640 File reported model: P895
05:27.796 File reported model: P895
05:27.856 Partition EBT.CRYPTED flashing ...
05:38.347 Error: data port: timeout: at address 0x00110000
08:47.965 Restoring to factory defaults
08:47.976 Read failed: Access is denied.
вещи я пытался

Изменить порт
Изменить Кабельное
Удалить батареи
Изменить ПК

Кстати, я использую P990 кабель с резистором 910K

Спасибо заранее