И теперь получается вот такая картина:
COMM_LoadBoots : selected phone family is 13
TTY_OpenCOMPort : opening COM3
TTY_OpenCOMPort : baudrate is 115200, DTR is disabled, RTS is disabled
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : sending boot 0 for model 13
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 1 for model 13
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 2 for model 13
COMM_SendBoot : waiting for boot ack
COMM_SendBoot : sending boot 3 for model 13
COMM_SendBoot : waiting for boot ack
COMM_LoadBoots : Checking bootcode..
COMM_LoadBoots : internal loader version is 01.00
SEC_BCDIMEIToNormalIMEI : invalid decoded IMEI
COMM_LoadBoots : EEPROM IMEI (17) is corrupt
COMM_LoadBoots : original IMEI is 35197600272424 (locked)
COMM_LoadBoots : found SIEMENS A60 lg91 v27 (1)
COMM_LoadBoots : flash ids are 0001220C [00000000] - 0C01
COMM_LoadBoots : phone ids are AC911A86 [AC911A86]
COMM_Write : using D:\INSTALL\MOBILE\BACKUP\SIEMENS\A60\A60_(TEST_POINT)_2005-11-11_14-27-49_FROM_00.BIN
COMM_Write : startaddress is 007C0000 end is 00FC0000
COMM_Write : adjusted startaddress is 007C0000 end is 00FC0000
COMM_NormalWriteFlashBlock : received target address is 007C0000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0080, target address is 01F0:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : flashbase is 0080, target address is 01F0:0000
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : received target address is 007D0000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0080, target address is 01F4:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : flashbase is 0080, target address is 01F4:0000
COMM_NormalWriteFlashBlock : writing block
COMM_NormalWriteFlashBlock : received target address is 007E0000
COMM_NormalWriteFlashBlock : received blocklength is 65536
COMM_NormalWriteFlashBlock : sending block
COMM_NormalWriteFlashBlock : flashbase is 0080, target address is 01F8:0000
COMM_NormalWriteFlashBlock : erasing block
COMM_NormalWriteFlashBlock : erase error at 007E0000
TTY_CloseCOMPort : Closing COM3
Это фрея....
V_KLay примерно тоже самое говорит...
Другие проги не пробовал, но думаю будет аналогично.
Как побороть?
Поможет ли полное форматирование флеша?
Если да, то чем посоветуете форматировать?
Подскажите плиз!
Заранее спасибо.
Ответить с цитированием
