Подскажите чем и как прошить 7710:att: UFS+HWK=мигающий дисплей не конектится.
Подскажите чем и как прошить 7710:att: UFS+HWK=мигающий дисплей не конектится.
Не знаю... Я 7710 шил всего 2 раза, оба раза УФСом и оба раза без проблем.
А сброс пробовал??
How to reformat Nokia 7700 and 7710?
In case of serious problems with your Nokia 7700/7710 (if e.g. your phone doesn't start or it is very unstable) use the following method to reformat the device. Please, be aware that this function brings your phone back to a factory state, i.e. it removes all applications, files and data.
• Disconnect the charger and remove the battery.
• Wait for about ten seconds and insert the battery to start the device.
• When you see the NOKIA welcome screen, immediately press and hold two lower keys on the left side (the [= key and the Menu key) and shortly after that press and hold the second key from the top on the right side on the phone.
• Confirm that you want to format. Formatting will start.
А можно поподробнее - как UfS +HWK можно прошить этот аппарат - а то принесли - Часть окон неактивна ( писали здесь об этом - но ответа не нашёл)Буду очень признателен за помощь!!Сообщение от DrugMan
что это значит...а как проишть уже не раз говорилосьСообщение от ScheriV 73
Сообщение от almira
Советую шить с ЖАФ-ом, ни один раз с проблемой не сталкивался и не забудь кроме RJ45 кабелом с DKU кабелем прошивать.
всем респект!
7710 шьется через 2 кабеля-фбас и дку2,
так как через дку2 прошивается ape часть.
т.е. нада жаф или мт бокс, но никак не уфс!