Кто может продать код для снятие сим лока на Трео 650 за WMZ
Кто может продать код для снятие сим лока на Трео 650 за WMZ
Можно дешевле-хотя это секция не для продажи....
Какой оператор...
Что на дисплее пишет???
Последний раз редактировалось martyn911; 03.04.2006 в 14:28.
Уже сделал давно
где и за сколько?Сообщение от ghostku
По знакомству ~30ye
появилось ли не on-line решение для разблокировки Treo 650?
Понимаю что тема старая ,но для меня она актуальна и сейчас ...
Принесли Treo 650 Cingular на разблокировку ....как не крутил не чего не выходит! Как его разблокировать Furious(ом)?
Вот что нарыл на саппорте
Q: How i read codes from TREO 650 and use them to unlock it ?
Reading Your phones Unlock Codes
1. Run treo read code software
2. remove any card inside in phone
3. Remove Treo Battery Cover & Power on your Treo
4. Connect USB Sync Cable (as supplied with phone)
5. Place Phone in “Test Mode”
- Press and Hold Button on USB Cable
- Using Pen Press and hold for 1 second Reset button in Back of Treo
- Release reset button, then release Active Sync button on Cable
- Display should be red/blue etc and detail boot loader version
- Phone is now in Test Mode
If Windows now detects a new device (this will happen the first time you put a treo 650 into
test mode, then you will need to do the following
(you will only need to do this once)
1. A new hardware wizard will appear. Select “No, not this time” if asked about connecting to the internet
2. Then on the next screen Select “Don’t search, I will choose driver to install.” Click on
the “Have Disc … “ button
3. Select the drivers, direct windows to the folder containing the Treo HTTC drivers, if presented with a Windows warning about Microsoft signing of drivers. Choose “Continue Anyway”
4. Windows will now install the drivers.
5. Click on finish on next screen
6. Windows has finished installing New Hardware .You will only need to do this once per PC.
7. Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds)
Entering Codes
1. Remove Treo battery, unplug cable
2. Insert incorrect SIM card (1 the phone does not accept)
3. Power on Treo-650, “Sim not allowed” is displayed, click “ok”
4. Go to the dial pad, and use the stylus to enter code exactly as displayed in the software. Then press “Dial”
5. Phone will reset and display “sim lock removed”
Phone Unlocked !!!!
Я дошол до 7 пункта ...но программа не чего не вычитывает...
Вчём проблема ..???