Здраствуйте, колеги.
Нужна Ваша помощь.
Есть K600, был моргаликом. Ко мне попал после неизвестных програмных действий (возможно с ТП), в наличии есть круизер и сетул. Искал по форуму ответов на свои вопросы не нашел, вот что имею на сегодняшный день:
SETool:
GUI v0.91373018/UNI
Card serial:0000хххх
Loaded 49 flash descriptors
Opening box.
There is 2 ftdi devices
ufs #хххх ready to work
Elapsed:0 secs.
***Unlock/Repair (Testpoint)***
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Speed:460800
RELEASE TESTPOINT NOW, THEN PRESS TESTPOINT OK
Elapsed:20 secs.
***Flash (Testpoint)***
ATTACH TESTPOINT NOW, THEN PRESS TESTPOINT OK
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Speed:460800
RELEASE TESTPOINT NOW, THEN PRESS TESTPOINT OK
Elapsed:16 secs.
***Recovery***
RECOVERY MODE STARTED
PHONE IS INVISIBLE (00000000)
err: 45
loader prologue returns invalid status
PHONE IS INVISIBLE (00000000)
Recovery:040318 1450 LLECXC1325413_CERTLOADER R3J
Fetching phone data from OTP
llbug: trashed answer.
ReadOTP failed, exiting
Elapsed:14 secs.
***Unlock/Repair***
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Cowardly refusing to load empty loader.
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:2 secs.
***Flash***
ChipID:7100,EMP protocol:0301
PHONE IS INVISIBLE (00000000)
NO valid FLASH CID detected (00)
Cowardly refusing to load empty loader.
failed to load CERTLOADERS,try to use RECOVERY.
Elapsed:2 secs.
Cruiser:
K600i, 460800 bd, Normal boot
Version 9.03 ready!
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.
**************************
No suitable applet found.
**************************
K600i, 460800 bd, Recovery boot, CID=49
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Trying CID49 recovery applet...
Sending applet prologue...
All threads terminated.
**************************
пусто
**************************
K600i, 460800 bd, Normal boot, any CID, use TP
Connecting via Fighter USB Cable...
Connect the testpoint!
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Trying recovery applet...
Sending applet prologue...
Disconnect the testpoint!
Sending applet ************...
Time spent entering bootstrap: 6s
Initializing phone hardware...
All threads terminated.
**************************
Applet error: ERROR GETTING THE FIRST FLASHDEVICE
The applet has intentionally turned the phone off!
Script error: Unspecified [9.03.30]
**************************
Подскажите, можно ли поднять тело, если "Да", то как...
Заранее благодарен.
Сообщение от Zlonamer
