Информация не проверена, пока никто ничего не ответил
источник:
http://www.gsm-extreme.net/forumdisplay.php?f=44
Hi,
there 3 dump for smart clip
1.Atmega128,pic and eeprom
you need to use PIC12F629 instead of Dallas DS2401.
The dump is attached. SN 387335188.
;================================================= =================
; Dalas DS2401 emuliator
; ZQ = 20Mhz
; with serach rom function & fixed number
;================================================= =================
LIST p=12F629
#include "P12F629.INC"
__CONFIG _CPD_ON & _CP_ON &_BODEN_ON &_MCLRE_OFF & _PWRTE_OFF & _WDT_OFF
& _HS_OSC
12c509
Atmega config below
Configuration is:
LB=mode3 LB1/2 - ON
AP=mode1 BLB01/02 - OFF
BP=mode3 BLB11/12 - ON
Ext Fuse: 11111111
Fuse High: 11001000
Fuse Low: 00100000
EEPROM u can read out...........
tested..............100% working
Attached Files