E66-1 RM-343 не включается, нет локала. НЕ срочно

[veshtort]

всем привет! есть тело при включении срабатывает вибро и начинает моргать подсветка верхней клавиатуры и телефон отключается клиент говорит что не ронял но как всегда веры нет:) говорит что такое случилось после замены сим карты
в локал не входит шьется норм вот чек уфса

1ST BOOT : C0,07 [Rm-343] [2.1.0.1]
RAPx ID : 000000010000022600010006400C192101031103
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 11200003F69F01582D8B09773F2FEDBC1180088F
RAPx MODE : 00
RAPx HASH : CAEEBB65D3C48E6DC73B49DC5063A2EE
RAPx ROID : 4B9B75103E691FF8
CMT 1ST Boot OK
CMT 2ND Bt: RAPIDOv11_2nd.fg, Ver: 1.37.1
CMT FLID0 : 00EC0040-00800121, Sam OneNAND-2G
CMT FLCNT : 00030000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAPIDOv11_algo.fg, Ver: 1.40.0
CMT KSIG0 : 96B8EDD55BE6A0011D2BA3B5A4D8D82F58BBFD93
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
INFO_2ND : APE Chip Absent
INFO_ALG : APE Chip Absent
PASUBTOC : PA_SL2 PA_SL3
Rebooting Mobile

[zestmax]

потребление проверяли?

[Daemon pisec]

попробуйте сначала пролить мцу отдельно, затем проверьте, локал может уже и появица. затем ппм тоже отдельно

[mironov-au]

Прошей ему ENO а затем последнюю пшивку.

Скрытый текст: Показать

PHONE DOES NOT START UP
Symptom:
Phone does not start up when pressing the power key. When pressing the
power key notification light and display backlight wake up. Vibra makes one
jog. Phone will take 230 mA current, but nothing else happens. After 30
seconds phone will power off.
With Phoenix you can't get connected to the phone. You can update phone
software, but it doesn't help anything. Phone doesn't start test mode in
Phoenix.
Above described case can be solved by flashing a file erasing the PMM data
from the phone and flashing it with new SW. Erase file is available on NOL.
Note! This file does not fix other issues such as if phone starts to test
mode but not to normal mode. Also this file should not destroy
undamaged device.
Procedure:
1) Flash E66_blank_504KB_pmm_10.fpsx file to phone with firmware update:
Firmware Update-> Options -> select E66_blank_504KB_pmm_10.fpsx into
Image field and empty other fields
2) Flash the whole SW package to phone with firmware update
3) Run factory settings
Phone should work now. Phone memory is empty and you can't save any old
data from phone memory. Memory card and SIM card should work as earlier
Вложения E66_blank_504KB_pmm_10.zip (930 байт, 246 просмотров)


Прошить как MCU E66_blank_504KB_pmm_10 затем прошить полную прошивку

[veshtort]

ENO заливал толку нет сейчас буду пробовать шить файлы отдельно

[veshtort]

прошил файлы отдельно не помогло

[veshtort]

Прошей ему ENO а затем последнюю пшивку.

Скрытый текст: Показать

PHONE DOES NOT START UP
Symptom:
Phone does not start up when pressing the power key. When pressing the
power key notification light and display backlight wake up. Vibra makes one
jog. Phone will take 230 mA current, but nothing else happens. After 30
seconds phone will power off.
With Phoenix you can't get connected to the phone. You can update phone
software, but it doesn't help anything. Phone doesn't start test mode in
Phoenix.
Above described case can be solved by flashing a file erasing the PMM data
from the phone and flashing it with new SW. Erase file is available on NOL.
Note! This file does not fix other issues such as if phone starts to test
mode but not to normal mode. Also this file should not destroy
undamaged device.
Procedure:
1) Flash E66_blank_504KB_pmm_10.fpsx file to phone with firmware update:
Firmware Update-> Options -> select E66_blank_504KB_pmm_10.fpsx into
Image field and empty other fields
2) Flash the whole SW package to phone with firmware update
3) Run factory settings
Phone should work now. Phone memory is empty and you can't save any old
data from phone memory. Memory card and SIM card should work as earlier
Вложения E66_blank_504KB_pmm_10.zip (930 байт, 246 просмотров)


Прошить как MCU E66_blank_504KB_pmm_10 затем прошить полную прошивку

прошил другой ENO и телефон заработал где нажать спасибо?