how To unlock smart phone 1

[Qmad3]

Sir I have a smart amazing phone here . how to unlock this without damaging the fone. Also can i change the o s to qtek is it possible sir

[dave9]

Application Unlocking your SPV (Tricky method!)

Courtesy of [Only Registered Users Can See Links Click Here To Register]

UNLOCKING THE SPV

1) Leave in the SD card (slows some bits down, giving better success rate)

1a) Put phone into cradle, ensure cradle is powered!

2) Make sure you've got an ActiveSync partnership running

3) Open a Windows Explorer window to ....

"My Smartphone/Windows"

... and leave it there

4) Copy out mxipcold_oem_10.provxml and mxip_oem_10.provxml

Note - Can't find them ? You may need to change a setting your PC. Go to "Control Panel" on your PC, click "Folder Options" - Click the "View" tab and click the relevant boxes to SHOW hidden files and system files. You should now be able to find the files!

4a) If you don't have both of these files then you must have the new update - look instead at the

5) Edit BOTH of these two files as follows:

5a) Remove the SecurityPolicy section ..

5b) Instead insert:

<characteristic type="SecurityPolicy">
<parm name="4101" value="64"/>
<parm name="4102" value="1"/>
<parm name="4119" value="196"/>
</characteristic>

6) Open a second explorer window looking at the copies that you've just edited (stored on your own PC harddrive)

7) Power down the SPV

7a) Remove the phone from the cradle

8) Hold the Record button down while powering up the SPV

9) Press and hold the Action (joystick middle button) button as instructed

10) Press 8 to erase IPSM data. (NOTE - Having problems here ? Click this!)

11) Once it's finished doing that (takes a while), it will say PASSED. Left twice and choose 3 to close the diags..

12) On the three colour Canary screen, pull the battery out. Wait a few seconds then pop it back in and start up normally.

13) Arrange the two explorer windows and the ActiveSync window on screen so you can see them all.

14) Once you're into the blue SmartPhone logo screen, wait a few seconds and put the phone in it's cradle.

15) Activesync should see the phone after about 20 seconds. Once it's made it's connection, copy the two PROVXML file(s) into the /windows explorer window you had open. The timing of the moving of the edited files is very critical – ENSURE that you copy them across as soon as possible after ActiveSync has connected.

Note - stuck here ? Try the auto-copying tool to do this for you!

16) Wait a while

17) Go into Internet Explorer and see if the favourite link is as you changed it. If none of the orange ones are there at all, go back to the home screen and wait longer and repeat.

Check that the files have changed all the way through and that this bit ....

<characteristic type="SecurityPolicy">
<parm name="4101" value="64"/>
<parm name="4102" value="1"/>
<parm name="4119" value="196"/>
</characteristic>

...appears in both. If not, don't worry - do step 18..

18) Check if it's worked by installing some non-certified software (see main page).

[hassan35278]

just wanna say man u are the boss