How can I flash a Sprint CDM8912 to Cricket?

cellphonerepair · 22-06-2007, 22:00

I have a Sprint CDM8912 that I've been trying to flash to Cricket with no luck. I have Unified PST but it's for Verizon phones. Has anybody had any luck with this? I'm using a usb cable. The phone indicates that it's charging when I plug it into the usb port, but none of the software will detect the phone. I am also using the DataPilot/Susteen cables which is why the phone will charge when it's plugged into my laptop. I have already changed the phone's port settings using ##7678 end. I have also changed the baud rate using ##2283 end. Any help would be greatly appreciated. If there's some specific software I should be using, I'm all ears.

Thanks in advance.

wchriseg · 23-06-2007, 00:15

well you need a com cable that is how i do them then just use cdma workshop and your good to go i dont even use usb cables anymore for any phone it is tomuch of a pain with 20 usb cables and 30 com ports to mess with

cellphonerepair · 23-06-2007, 01:20

I just needed to dig through my device manager a little and re-install some drivers. Sorted it right out. I don't even have any serial cables to work with. Thanks again.

1enigma · 23-06-2007, 02:18

So if you are not using cables what means are using to flash the phones?

cellphonerepair · 23-06-2007, 22:00

Quote:

Originally Posted by 1enigma [Only Registered Users Can See Links Click Here To Register]

So if you are not using cables what means are using to flash the phones?

What I meant to say was I don't have serial cables, just usb cables. I'm too lazy to solder together any serial cables and too cheap and lazy to buy any serial cables. Customers have actually brought me all of my usb cables that I use for flashing.

22-06-2007, 22:00	#1
cellphonerepair Mega Member Join Date: Nov 2006 Location: New Mexico, USA Posts: 308 Thanks: 114 Thanked 341 Times in 83 Posts Rep Power: 6	How can I flash a Sprint CDM8912 to Cricket? I have a Sprint CDM8912 that I've been trying to flash to Cricket with no luck. I have Unified PST but it's for Verizon phones. Has anybody had any luck with this? I'm using a usb cable. The phone indicates that it's charging when I plug it into the usb port, but none of the software will detect the phone. I am also using the DataPilot/Susteen cables which is why the phone will charge when it's plugged into my laptop. I have already changed the phone's port settings using ##7678 end. I have also changed the baud rate using ##2283 end. Any help would be greatly appreciated. If there's some specific software I should be using, I'm all ears. Thanks in advance.

23-06-2007, 01:20	#3
cellphonerepair Mega Member Join Date: Nov 2006 Location: New Mexico, USA Posts: 308 Thanks: 114 Thanked 341 Times in 83 Posts Rep Power: 6	Thanks. I got it figured out. I just needed to dig through my device manager a little and re-install some drivers. Sorted it right out. I don't even have any serial cables to work with. Thanks again.

23-06-2007, 02:18	#4
1enigma Senior Member Join Date: Feb 2007 Posts: 134 Thanks: 3 Thanked 5 Times in 5 Posts Rep Power: 3	Cont... So if you are not using cables what means are using to flash the phones?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Z520i big problem	ZAMORA	SE Tool support forum	5	15-02-2007 19:27
...: W810 not power on after flash :...	Jani-Jan	SE Tool support forum	6	16-01-2007 03:51
k750 error	daeron	SE Tool support forum	34	16-12-2006 07:16
8360 flash err.	lwilson	SE Tool support forum	1	30-10-2006 19:17
how to flash this w550i please	leroi	SE Tool support forum	4	10-08-2006 14:51

23-06-2007, 00:15	#2
wchriseg Mega Member Join Date: Sep 2005 Posts: 347 Thanks: 17 Thanked 146 Times in 61 Posts Rep Power: 6	well you need a com cable that is how i do them then just use cdma workshop and your good to go i dont even use usb cables anymore for any phone it is tomuch of a pain with 20 usb cables and 30 com ports to mess with

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)