unlock treo 600

[cloando]

Here are the instructions on how to fully unlock any Treo 600:

Unlocking is actually quite simple:

Part One:

1. Download and install Card Export. NOTE: The Card Export shareware install file is attached to this post.

2. Make sure you can see the Treo's SD card as a logical drive on the machine the Treo is connected to.

3. Dowload the flash, patched.zip, here.

Part Two:

1. Unzip all the files and copy them to the /PALM/LAUNCHER folder on your SD card.

2. Hard reset the Treo.

3. Navigate to the card using the standard application launcher and run FirmwareUpdater.prc.

4. Click OK, click the Update Now button (I may have forgotten one or two OK clicks here so don't hesitate to correct me here).

5. Sit back and relax, it's going to take a good 10 minutes.

6. The phone will automatically hard reset at the end of the process.

That's all, really. Note that I think it does do the entire 2.09 firmware upgrade, so all this should even work when you're on an older firmware version. I recommend you do the regular upgrade first though.

Good Luck


If you need more information check this links

[Only Registered Users Can See Links Click Here To Register]
[Only Registered Users Can See Links Click Here To Register]
[Only Registered Users Can See Links Click Here To Register]

[telemoveis]

solution working 100% on treo 600
Nice job

[Aamir Zia]

YES

Solution Working 100% Don't Care it releases long time ago ..
any Way thx for the Share


Topic Sticked

[atari]

solution is old 16 mounts, if you put solution for treo650 it will be something new....

[Aamir Zia]

I don't Think Anyone have a solution for 650

[amitks_in]

Tell me ! should I use an accepted sim card ? coz most phones dont opens menu without accepted sim card ? like Please insert correct sim card

[atari]

use pached fw, then you can use any card...

[elHerrero]

I've not been able to unlock treo 600 using this procedure. After trying to perform firmware update, imei on my treo went blank. No imei is displayed, so the treo won't go into wireless mode, this mode is always off.

Have you guys seen this problem? i need your help desperately. I don't know what to do. Somebody advised to use TOKEN WRITER to repair data on the treo. I have tried it, but with no success. Imei is still blank. Anybody know how to use this TOKEN WRITER??.

I need help, i need to solve this problem and to unlock the treo.

Best regards

[atari]

see:
[Only Registered Users Can See Links Click Here To Register]

[elHerrero]

Originally Posted by atari

see:
[Only Registered Users Can See Links Click Here To Register]

Problem was solved.

The major problem was that the patched firmware on the link is not the right one. I downloaded another one from mytreo forum and it worked like a charm.


By the way. To rebuild the imei the token writer command is:

Write imei xxxxxxxxxxxxxxx (15 digit imei number)

The other command that gsm forum user said is to rebuild serial number.

Anyways when wireless mode is not active, that info is always blank. So, if anyone gets this problem, do not worry..

If anyone needs help to unlock treo 600, just contact me. I'll be glad to help and provide the right info

Best Reagards.