<TARAS>
13.08.2007, 23:43
прошивал оптиком - C300_OptiFlash_For_Sharp...
делал унікбоксом и ufs+directcom...
вот лог оптика, может кто чем помочь?
I E170 00:49:13 Flash loader version: V5.13
I E171 00:49:13 Max. TX/RX size: 65536/32768
I E172 00:49:13 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E173 00:49:13 IDs returned by detection: 1
I E174 00:49:13 AMD:0xb0/0x001d0000, Intel:0xb0/0x001d0000, NAND:0x00/0x00000000
I E175 00:49:13 Detected flash chips: 1
I E176 00:49:13 0xb0/0x001d0000: Sharp LRS18CA 128_64 (16 MB (16777216 Bytes) in 131 sectors)
I E177 00:49:13 Write buffer size: 16
I E178 00:49:13 COM7: changing baud rate to 460800
I E179 00:49:13 COM7: baud rate set to 460800
I E180 00:49:14 Sync'ing
I E181 00:49:14 sync'ed
I E182 00:49:14 Port info:
I E183 00:49:14 Logical port 0: COM7 <-> UART1 at 460800 baud (~100%)
I E184 00:49:14 TalkToFlashloader: OK
I E185 00:49:14 There is 1 reserved region defined:
I E186 00:49:14 1: 0x00008000 - 0x0001ffff = 98304 Bytes
I E187 00:49:14 'Erase unused memory' option is ENABLED !
I E188 00:49:14 2 memory regions have to be flashed:
I E189 00:49:14 1: 0x00000000 - 0x00007fff = 32768 Bytes
I E190 00:49:14 2: 0x00020000 - 0x00ffffff = 16646144 Bytes
I E191 00:49:14 Data to be transferred: 15 MB (16678912 Bytes)
I E192 00:49:14 Setup
I E193 00:49:14 Sector: 0/0
I E194 00:49:14 OpenSector: 0/0, 0x00000000, 32768, 0x11
I E195 00:49:14 SendData: 0x00000000 - 0x00007fff
I E196 00:49:23 Cmd TXDT FAILED: Err:3, 0=0x0, 24576=0x6000, 0=0x0, 0=0x0
I E197 00:49:23 Retry 1: SendData
I E198 00:49:23 Sync'ing
I E199 00:49:23 sync'ed
P.S. етим боксом на етом же компе уже раньше успешно прошивал С300
делал унікбоксом и ufs+directcom...
вот лог оптика, может кто чем помочь?
I E170 00:49:13 Flash loader version: V5.13
I E171 00:49:13 Max. TX/RX size: 65536/32768
I E172 00:49:13 Mobile transfer speeds: 57600, 115200, 230400, 460800
I E173 00:49:13 IDs returned by detection: 1
I E174 00:49:13 AMD:0xb0/0x001d0000, Intel:0xb0/0x001d0000, NAND:0x00/0x00000000
I E175 00:49:13 Detected flash chips: 1
I E176 00:49:13 0xb0/0x001d0000: Sharp LRS18CA 128_64 (16 MB (16777216 Bytes) in 131 sectors)
I E177 00:49:13 Write buffer size: 16
I E178 00:49:13 COM7: changing baud rate to 460800
I E179 00:49:13 COM7: baud rate set to 460800
I E180 00:49:14 Sync'ing
I E181 00:49:14 sync'ed
I E182 00:49:14 Port info:
I E183 00:49:14 Logical port 0: COM7 <-> UART1 at 460800 baud (~100%)
I E184 00:49:14 TalkToFlashloader: OK
I E185 00:49:14 There is 1 reserved region defined:
I E186 00:49:14 1: 0x00008000 - 0x0001ffff = 98304 Bytes
I E187 00:49:14 'Erase unused memory' option is ENABLED !
I E188 00:49:14 2 memory regions have to be flashed:
I E189 00:49:14 1: 0x00000000 - 0x00007fff = 32768 Bytes
I E190 00:49:14 2: 0x00020000 - 0x00ffffff = 16646144 Bytes
I E191 00:49:14 Data to be transferred: 15 MB (16678912 Bytes)
I E192 00:49:14 Setup
I E193 00:49:14 Sector: 0/0
I E194 00:49:14 OpenSector: 0/0, 0x00000000, 32768, 0x11
I E195 00:49:14 SendData: 0x00000000 - 0x00007fff
I E196 00:49:23 Cmd TXDT FAILED: Err:3, 0=0x0, 24576=0x6000, 0=0x0, 0=0x0
I E197 00:49:23 Retry 1: SendData
I E198 00:49:23 Sync'ing
I E199 00:49:23 sync'ed
P.S. етим боксом на етом же компе уже раньше успешно прошивал С300