PDA

Просмотр полной версии : Инструкция по Wray for Alcatel



GSM™
29.05.2003, 15:51
Alcatel BF Unlocker v5.3


· BACKUPS are made before unlock and are saved in BackUps directory
with the
name of IMEI and extension .bak If something goes wrong on unlock, just
push
Restores and select the appropiate backup file. If something goes very
wrong
and you can't find the backup file don't disperate, just write a backup
from
a phone with the same software version or contact me on mail. Automatic
backup is made when you edit the pictures too. They are saved with the
name
of IMEI and extension .img in BackUps directory. Also when you click on
Backups the software backup the .fdi(eeprom) and .teh(technical) in
BackUps
directory. Is highly advisable to use this option on every phone
because
when backup is avaible any phone can be repaired. Also the backup are
made
fast in a couple of seconds. Other advise is to clear the BackUps
directory
often because it fills quick.

· EEPROM is not included like in other software because it was a silliy
mistake from the beggining. There isn't a eeprom in BF series. Only the
FDI
which is the emulated eeprom. That area, called EEPROM by others
software
makers was a combination of FDI+PERSO+LANGUAGES. You can backup the
eeprom
with Backups and restore it with Restores.

· CHANGE FIRMWARE mix the security area for 311,310 phones with Patch
Firmware. To change a firmware for 311,310 follow these steps: Hit
Backups
and the software will save the original .teh and .fdi in BackUps
directory.
You will need only .teh for the next steps. So for next step write full
flash with the needed software version. After that DON'T power on the
phone.
Hit Patch Firmware and select the original .teh. Hit Change Imei and
modify
at least one digit. You must Unlock the phone for the next step because
without this the phones works but is locked. Take care, the sim card
must
not be inside when you power up the phone for the first time after
changing
firmware, after the first power up you can insert sim card and
everything
will be normal. If you power up for the first time with sim inside the
phone
will not see the battery level ok. If this happent make all of these
again.
· To change a firmware in a 511,512 is much simpler. Hit Backups and
the
software will save the original .teh and .fdi in BackUps directory. You
will
need only .teh for the next steps. So for next step write full flash
with
the needed software version. After that DON'T power on the phone. Hit
Change
Imei and modify at least one digit. After that use Restores and select
the
origial .teh. For 10R version you have to use Patch Firmware like for
311
phones, not Restores. If you make it with Restores, the phone will not
have
lights and some problems with graphics. You must Unlock the phone for
the
next step because without this the phones works but is locked. Now you
can
reset to defaults, but is not really necesary. The code for reseting to
defaults only work with SIM inside. The code is: ###847#

· REPAIRING can be done only if you have the security area intact. To
repair
it you will have to change the firmware like I wrote before.

· COMPLEX LANGUAGES can be changed with firware change too. So, see the
description on firmware change. You will have to write a complex
firmware
(310 or 512 firmware) and after that upload the language pack you need.
For
new 511 phones (10Q,10R) you don't have to change the firmware anymore.
Just upload the complex language pack you need.

· IMEI CHANGING works now on 511,512 too. You have to make full bakup
or at
least the .teh and .fdi with Backups button. After that simply push
Change
Imei and enter the desired IMEI.

· CHECKSUMS fuction check if the zone checksums are OK. This is
performed on
saved full flashes. If the checksums aren't OK you can repair them.
TAKE CARE this is made in direct access, so the software overwrites the
flash file. A backup to this file will be necesary. With this function
you
can repair phones wich doesn't charge and the battery indicators blinks
empty.

· GRAPHIC CHANGE is possible now on 511,512 too. You can save the
pictures
in .bmp format and edit them in any editor (Paint). After that you can
load
them and upload into the phone.

· THAI SMS can be fixed by uploading the KJ246 flash from my web site
with
the procedure described on Patch Firmware.

· LANGUAGE MENU can be fixed if is not enabled by writing a new .pso.
Some
good .pso files can be found on my web site too.

· NEW VERSIONS unlocking is fast now. Only push Unlock. On 253 after
unlock
change at least one digit in IMEI. Don't forget to make backup before.
New
version supported: 104-KJ159, 10R-52K, 10R-52L

service
12.06.2003, 18:14
Привет,
У кого есть прошивки для алкателей BF3-4, be1-5, BG3, сообщите, или скажите где можно скачать?
очень нужно.

GSM™
14.06.2003, 14:27
Может поможет тебе этот линк :)

service
24.06.2003, 17:41
GSM
там только на бе1-5, но все равно спасибо:)

service
14.07.2003, 18:22
НУ ПОГАНЫЕ эти алкатели, перешил так он зараза выключаться перестал, и сеть ловить начал.

GSM™
18.07.2003, 17:58
service
Вишь однако как Teh зона полезна верная :)

GSM™
23.07.2003, 23:23
Нда, очередной раз убеждаюсь какое это гуано алкатели....

service
25.07.2003, 19:59
GSM
ТЫ БЖ3 не разлачиал еще? Проги какие-нибудь есть?

service
19.08.2003, 17:51
я прогу одну скачал BFG Service Aheadgsmv29, кто-нибудь пробывал ее разлачивать алики? как она себя ведет?

Юрикус
07.09.2003, 19:04
Нуждаюсь в комлекте техзон для ВЕ4, у меня есть LOTO с 52-мя зонами.Все перебрал более менее подошли 41 и 43я, аппарат ожил видит сеть, но каждые 2 минуты перезагружается.На www.gsm-repair.com.ua говорят что есть 87 техзон, а файловый архив не работает.
Может кому нибудь попадалось, подскажите пожалуйста.

DUZER
23.12.2003, 16:12
Автор оригинала service
я прогу одну скачал BFG Service Aheadgsmv29, кто-нибудь пробывал ее разлачивать алики? как она себя ведет?
Чего за прога такая? Откуда качал?