w800 немагу прошить

[uintik]

Пинесли w800 (ужесил нет сним бадаться) маргалик,нешьётся лог с xs++:17:57:23| XS++ v3.1 (Darwin) Ready !
17:57:23| Executed on Microsoft Windows XP
17:57:33|
17:57:33| Attempting to open the interface...
17:57:33|
17:57:33| TURN OFF PHONE!
17:57:33| Hold 'C' button on phone and connect phone NOW.
17:57:33| You have 30 seconds...
17:57:33|
17:57:33| Baseband ID: 8040
17:57:33| Protocol Version: 3.1
17:57:33|
17:57:33| Sending db2010_cid00_prodid_p3l.bin...
17:57:33| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
17:57:33| This is a PRODUCTION_ID loader
17:57:33| Activating GDFS...
17:57:33| Phone name detected!
17:57:33| Restarting phone - please wait...
17:57:33|
17:57:33| Disconnect phone from USB-port and wait for
17:57:33| further instructions.
17:57:33| You have 10 seconds.
17:57:33|
17:57:43| Open the battery-cover and reinsert the battery.
17:57:43| Hold C Button on phone and connect phone again.
17:57:43| You have 30 seconds.
17:57:43|
17:57:44| Baseband ID: 8040
17:57:44| Protocol Version: 3.1
17:57:44| Phone has restarted successfully...
17:57:44|
17:57:44| Profiling SEMC phone...
17:57:44| Platform: DB2010
17:57:44| OTP CID: 36
17:57:44| EROM CID: 36
17:57:44| EROM Color: Brown
17:57:44| IMEI: 35682900xxxxxx
17:57:44| Phone ID: W800
17:57:44| Region: EUROPE_1
17:57:44| CDA: CDA102430/9 R7A
17:57:44| Firmware Version: R1BC002
17:57:44| EROM: n/a
17:57:44| Ready for operation!
17:58:22|
17:58:22| Sending db2010_cid49brown_flash_r5a.bin...
17:58:22| Prologue: Failed
17:58:22| Error: Cannot send flash loader
17:58:22| Error: Flashing failed
17:58:24| Disconnected... Unplug the phone
Лог уфс :McuId: 80400301FFFFFF, CID: 36, 98 (Brown)
Mcert: A1_DB2010_36_BROWN
Baud Rate: 921600
X_W800_CXC1250092_EU1_CA_R1NA005.bin [DB2010_36_RED]
Trying: CXC1326738_000000_0002_R2AB{0102030401}.bin
PayLoader Certificate Rejected :00 46 32 09 7A
Trying: CXC1326738_041214_0816_R2U{0101030402}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 041214 0816 LLECXC1326738_COMPACTFLASHLOADER R2U, Ok
IMEI : 356829-00-195114-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 200D, ST M30L0R8000T0
FlashImage: X_W800_CXC1250092_EU1_CA_R1NA005.bin (36_RED)
Certificate Error F.3: 09 95
MCU Part_1 Flashing Failed, Time: 00:01 чего ему надо ? (блин, быстрейбы сетул в магаз завезли.)

[expl]

У тебя телефон "коричневый",а прошивка "красная"..Залей ему erom_red,а потом вливай прошивку и будет тебе счастье.

[uintik]

Народ дайте сцылку на erom_red для ufs.

[expl]

для фара...

[Влади]

там кнопка есть если мне память не изменяет,перекрашивает которая

давным давно просто имел дело с W800 совтово убитым,так вот в просторах инета нашёл кучу инфы по восстановлению,в том числе про перекрашивание и т.д.,так вот сид 36 перекрашивается без влития ерома.

[uintik]

Сделал его красным. Прошил прош с супора:_W800_R1BC002_GenericAPAC1.zip терь при попытки кустомизации уфс говорит:X_W800_CDA102430-101_R3A_GenericAPAC1.bib [Cust Bundle]
McuId: 80400301FFFFFF, CID: 36, 4 (Red)
Mcert: A1_DB2010_36_RED
Baud Rate: 921600
Trying: CXC1326738_000000_0002_R2AB{0102030401}.bin
PayLoader Certificate Accepted
Prolgue Ok
PayLoader: 050425 0904 MATCXC1326738_COMPACTFLASHLOADER R2AB, Ok
Trying: CXC1326739_R2K{0101030301}.bin
PayLoader Certificate Accepted
041101 1458 NPACXC1326739_COMPACTCERTLOADER R2K
PayLoader Ok
IMEI : 356829-00-195114-0, CID: 36, CDT: 1 0 1 (Red)
FlId0: 200D, ST M30L0R8000T0
OTP_F: 530F3125439ECB35 - Locked
OTP_U: 1480DD7105A0A22F - Locked
Uploading Err 3: TimeoutStx1
Loader Fail: App7

[uintik]

Народ,тада хоть подскажите, какую можно лить на 36сид:
R1BC002
R1N035
R1NA005
R1AA008

[uintik]

Народ,ситуация сменилась теперь есть сетул. Подскажите что ему нужно залить, чтобон ожил?

[Влади]

прошивку полностью с ГДФС и кустомизацией.Если уж сетулом не будет дошивать,то флеха больная.

[Dimagsm]

почитай фак

http://www.mobile-files.ru/forum/showthread.php?t=100005&page=2

[uintik]

я его читал,но дело в следующем лог:

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1BC002_CXC1250092_EU_1_CA
Restore from:R1BC002_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\Admin\Мои документы\v0.914020\rest\R1BC002_CXC1250092_EU_1_CA"
writing C:\Documents and Settings\Admin\Мои документы\SE-Tool (H)\eroms\w700red_erom.ssw.cry
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:2
Will flash 2 blocks...
SSW loading returns:0
Elapsed: 40 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
phone pre-boot failed,possible RECOVERY needed.
Elapsed: 27 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900195114 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1BC002_CXC1250092_EU_1_CA
Restore from:R1BC002_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\Admin\Мои документы\v0.914020\rest\R1BC002_CXC1250092_EU_1_CA"
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 221 secs.

[Dimagsm]

ресты скачай с сапорта а потом пробуй шить

Пример-выбираем файлы
w800_R1BC002_EU1_MAIN.ssw
w800_R1BC002_FS_EMEA1.ssw

вкладка сетинг комплит и анлок
Flash

P.S в последнем факе все изложено по полочкам

[uintik]

Тож самое:Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
Flash ID check:200D
Flash props sent ok
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900195114 CERT:RED
FLASH CID:49 COLOR:RED

Model:W800i
MAPP CXC article: R1BC002 prgCXC1250092_EU_1_CA
MAPP CXC version: R1BC002
Language Package:EMEA_1
CDA article: CDA102430/9
CDA version: R7A
Default article: cxc1250093
Default version: R1BC002
PROVIDER: 000-00
SIMLOCKS NOT DETECTED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R1BC002_CXC1250092_EU_1_CA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed: 3 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:460800
OTP LOCKED:1 CID:36 PAF:1 IMEI:35682900195114 CERT:RED

REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

Open COM port OK
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:200D
Flash props sent ok
FOUND: R1BC002_CXC1250092_EU_1_CA
Restore from:R1BC002_CXC1250092_EU_1_CA
can't open file "C:\Documents and Settings\Admin\Мои документы\v0.914020\rest\R1BC002_CXC1250092_EU_1_CA"
Setting up GDFS...
Writing simlocks...
ALL UNLOCK/LOCK CODES SET TO "67848278"
Signing...
control keys complete.
full sig complete.
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V23
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 228 secs.

[Dimagsm]

НЕТ слов ну прочти ты фак нормально с растановкой!!!

[uintik]

Разобрался. Труба ожила.