Anik
13.07.2008, 17:20
не могу прошить w600 есть только круизер когда выбираю пршивку сразу выдат ошибку
Flash color/CID mismatch!
Script error: Flash error [13.02.77]
[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Brown
Flash certificate: A1_DB2010_49_BROWN
Trying Brown CID49 flash applet...
Sending applet prologue...
Sending applet ************...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): W600i
CXC article: R7B039 prgCXC1123106_GENERIC_EE
CXC version: R7B039
Language package:
Operator:
CDA article:
CDA version:
Default article:
Default version:
Phonecode: 0000
Sending applet...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 0
Primary certificate color: None
Failed!
BATTERY VOLTAGE OR USB TRANSFER SIZE MAY BE TOO LOW!
RSA protection is normal.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W600i_CXC1123106_EU1_R7B039_Brown49.cw6sw"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Flash color/CID mismatch!
Script error: Flash error [13.02.77]
[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Brown
Flash certificate: A1_DB2010_49_BROWN
Trying Brown CID49 flash applet...
Sending applet prologue...
Sending applet ************...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Phone type (from GDFS): W600i
CXC article: R7B039 prgCXC1123106_GENERIC_EE
CXC version: R7B039
Language package:
Operator:
CDA article:
CDA version:
Default article:
Default version:
Phonecode: 0000
Sending applet...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_CO...
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 0
Primary certificate color: None
Failed!
BATTERY VOLTAGE OR USB TRANSFER SIZE MAY BE TOO LOW!
RSA protection is normal.
Phone hardware initialized OK
[ --- Flash Main Firmware --- ]
Flash file: "W600i_CXC1123106_EU1_R7B039_Brown49.cw6sw"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...