S75 bootcore

[MAG_mobile]

НЕ могу поднять S75 flash 017E пишет стертый буткор, супорт закрыт что есче все ослажняет нехочет шить ошибки выдает до етого просто надобыло разлочить телефон рабочий был
======================================================
MARTECH Siem Serv. Tools 14.7 Info File
======================================================
DEVICE TYPE : BOX II / BOX II PLUS

Selected COM Speed : 460800 kbd
Selected Phone Type : S75
Selected kind of Service Mode : DIRECT Mode
Use slow Unlock/Repair method : NOT SELECTED
Don't check Ph.Type (for Repair) : NOT SELECTED
Auto Show Test-Point Info : SELECTED
-----------------------------------
SETTINGS_01 : SELECTED
SETTINGS_02 : SELECTED
SETTINGS_03 : NOT SELECTED
SETTINGS_04 : SELECTED
SETTINGS_05 : SELECTED
SETTINGS_06 : NOT SELECTED
SETTINGS_07 : SELECTED
SETTINGS_08 : SELECTED
-----------------------------------
Phone Type: S75
SW Version: 40
Flash Type (SW): 017E
Flash Type (HW): 017E
Phone ID: 0987993E
LANG / T9: None / None

MESSAGE BOX:
______________________________________________________

ERROR (02.10)
HIGH_SPEED_MODE ERROR(1)[460800]
Phone connected ok.
======================================================
MARTECH Siem Serv. Tools 14.7 Info File
======================================================
DEVICE TYPE : BOX II / BOX II PLUS

-----------------------------------
Selected COM Speed : 115200 kbd
Selected Phone Type : S75
Selected kind of Service Mode : DIRECT Mode
Use slow Unlock/Repair method : SELECTED
Don't check Ph.Type (for Repair) : SELECTED
Auto Show Test-Point Info : SELECTED
-----------------------------------
SETTINGS_01 : SELECTED
SETTINGS_02 : SELECTED
SETTINGS_03 : NOT SELECTED
SETTINGS_04 : SELECTED
SETTINGS_05 : SELECTED
SETTINGS_06 : NOT SELECTED
SETTINGS_07 : SELECTED
SETTINGS_08 : SELECTED
-----------------------------------
Phone Type: S75
SW Version: 40
Flash Type (SW): 017E
Flash Type (HW): 017E
Phone ID: 0987993E
LANG / T9: None / None

MESSAGE BOX:
______________________________________________________

ERROR (49.02)
[ERASE_FLASH_02](00)
At address: 00000000
Phone connected ok.

______________________________________________________