GSM™
26.06.2003, 18:50
1. Flash the set with DM tools 3.15 (http://www.mobile-files.ru/files/pafiledb.php?action=file&id=553). Using the flash file here (http://www.mobile-files.ru/files/pafiledb.php?action=file&id=557)…then reset e2P after the flashing is completed.
2. When you switch the set on it will now show “ILLEGAL SOFTWARE LOADED” and L.E.D lights will be Green.
3. Open the 6 screws (4 visible 2 hidden under the Internal antenna cover).
4. Remove Resistor R75 near the RAM (Crush or Break it) Board layout here and Schematics over resistor here.
5. Close the phone carefully and switch on ..now Illegal software is no longer present.
6. Open the language activator (here) and attach Data Cable to the phone …phone should be off.
7. Switch on the phone ….the moment the phone powers on …and you see the “M” on the display .press activate lang.
8. The phone will “reset" switch On and off ) and all languages will be activated…but LIGHTS will still be GREEN.
9. Press *#301# and then the “send” key….then press “select" top right Button) the display will be Green ..Press the “down” Arrow Key and the display will be blue……now press the Disconnect key 3-4 times shortly to exit from the Menu.
10. Press *#0000# ….and then "send" key. Phone will say “settings Saved”…and the Lights will Now be Blue..
That’s all Enjoy.
Оригинал: http://www.themobileking.com/c300.htm
2. When you switch the set on it will now show “ILLEGAL SOFTWARE LOADED” and L.E.D lights will be Green.
3. Open the 6 screws (4 visible 2 hidden under the Internal antenna cover).
4. Remove Resistor R75 near the RAM (Crush or Break it) Board layout here and Schematics over resistor here.
5. Close the phone carefully and switch on ..now Illegal software is no longer present.
6. Open the language activator (here) and attach Data Cable to the phone …phone should be off.
7. Switch on the phone ….the moment the phone powers on …and you see the “M” on the display .press activate lang.
8. The phone will “reset" switch On and off ) and all languages will be activated…but LIGHTS will still be GREEN.
9. Press *#301# and then the “send” key….then press “select" top right Button) the display will be Green ..Press the “down” Arrow Key and the display will be blue……now press the Disconnect key 3-4 times shortly to exit from the Menu.
10. Press *#0000# ….and then "send" key. Phone will say “settings Saved”…and the Lights will Now be Blue..
That’s all Enjoy.
Оригинал: http://www.themobileking.com/c300.htm