C6-01 (rm-718) чем прошить?

[ALload]

Доброго время суток. Есть циклон, джаф, уфс, мх, не чего не берет...

[S_E_Killer]

Доброго время суток. Есть циклон, джаф, уфс, мх, не чего не берет...
Phoenix Service Software 2011.08.003.45122

[Rezzoo]

Может хоть логи выложите?Будем смотреть в чём причина...А для чего хотите его прошить?Что с ТА?

[yoga]

Оборудования есть но пользоватся не умеем! Как вам не стыдно!!
Posted from Mobile Device

[ALload]

люди сами пытались обновить прошивку... на данный момент срабатывает вибро и тишина висит на 0.15 сек 20 и вырубается
вот лог циклона
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-718_013.016_79.92_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 1C50020B2CD6034422D3B5B3D063970C1AAF2CA8
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
RM-718_013.016_79.92_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006800000131, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0068 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Processing Flash Image Failed ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Process all Image files -> Failed to process RM-718_013.016_79.92_prd.core.fpsx


соответственно инфу не читает

[ALload]

стыдно сенсеи но не стыдно спросить

[ROMAN_-_666]

14.2 пробуй

[Rezzoo]

[
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Process all Image files -> Failed to process RM-718_013.016_79.92_prd.core.fpsx


А вот это всё ни на какие размышления не наталкивает?

[ALload]

1,2,3 отпадает
4 под вопросам если при обновление они его не уронили в кружку с чаем...
5 bootrom don`t support вот поэтому и спрашивал чем прошить

Прошил Phoenix-ом всем спасибо!!!