Undespoted
10.06.2011, 10:05
Доброго времени суток,столкнулся с таковой проблемой:
3шт 6700С RM-470.каждому из них был произведен format Best,ом. по USB
Селф Тест до формата:
Initializing Tests...
IMEI : 3515250******* , Phone : RM-470 Nokia 6700 classic
Get keys...
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKLIGHT_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_LCD_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
->ERROR | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_ACCELEROMETER_TEST
NOT RUN | ST_USB_LOOP_TEST
PASSED | ST_CAMERA_AUTOFOCUS_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_LED_CONTROLLER_TEST
PASSED | ST_USB_CHARGER_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT EXECUTED | ST_CDSP_TX_IQ_TEST
NOT EXECUTED | ST_CDSP_TXC_DATA_TEST
NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end
Инфо:
Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 10.50 23-11-09 RM-470 (c) Nokia
IMEI : 35152504******
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.50 23-11-09 RM-470 (c) Nokia I
CNT : Content: i_ru_chrome CTV RU 23-11-09 RM-470 (c) Nokia
Product SN : KQE051677
Product code : 0593976
Base Prd.code: 0590482
Module code : 0204199
Long Prod.SN : 0
Hardware info=======
HWID : 1006
Retu : 34
Tahvo : 00
Batery: 3937 mV
Camera:
CMT BT: 410B-v170
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 351525040340342
IMEI spNet : 3A 15 25 05 04 43 30 04
IMEI svNet : 33 15 25 05 04 43 30 34 F9
Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
формат:
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 08D00016DD6C0344063210100ED4D6183AB58FA4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:04
ADL: Erase done
ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Лог прошивки:
Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_018.image_i_bg_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 08D00016DD6C0344063210100ED4D6183AB58FA4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_018.image_i_bg_black
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm470__13.10_ISM_018.image_i_bg_black
Total writen 205 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:16
Reboot phone now...
Afterflash not selected, skip
Done!
Elapsed: 00:00:25
Connect phone on selected interface...
После сея девайс не входит в Local и при нажатии кнопки вкл,запуск не проходит,тускло горит подсветка экрана.....
Всё это было только с одним ТА,после решил выяснить,и решил такими же манипуляциями других, абсолютно рабочих 6700 пролить....Результат как и у первого....:
Что не так?
3шт 6700С RM-470.каждому из них был произведен format Best,ом. по USB
Селф Тест до формата:
Initializing Tests...
IMEI : 3515250******* , Phone : RM-470 Nokia 6700 classic
Get keys...
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKLIGHT_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_LCD_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
->ERROR | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_ACCELEROMETER_TEST
NOT RUN | ST_USB_LOOP_TEST
PASSED | ST_CAMERA_AUTOFOCUS_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_LED_CONTROLLER_TEST
PASSED | ST_USB_CHARGER_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT EXECUTED | ST_CDSP_TX_IQ_TEST
NOT EXECUTED | ST_CDSP_TXC_DATA_TEST
NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end
Инфо:
Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 10.50 23-11-09 RM-470 (c) Nokia
IMEI : 35152504******
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_09w37
APE Test:
PPM : V 10.50 23-11-09 RM-470 (c) Nokia I
CNT : Content: i_ru_chrome CTV RU 23-11-09 RM-470 (c) Nokia
Product SN : KQE051677
Product code : 0593976
Base Prd.code: 0590482
Module code : 0204199
Long Prod.SN : 0
Hardware info=======
HWID : 1006
Retu : 34
Tahvo : 00
Batery: 3937 mV
Camera:
CMT BT: 410B-v170
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 351525040340342
IMEI spNet : 3A 15 25 05 04 43 30 04
IMEI svNet : 33 15 25 05 04 43 30 34 F9
Conf key : 8000000000000002
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7
LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
CRT308 Backup Created
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
формат:
User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 08D00016DD6C0344063210100ED4D6183AB58FA4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: Preparing for erase...
Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x0FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:04
ADL: Erase done
ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!
Connect phone on selected interface...
Лог прошивки:
Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_018.image_i_bg_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 08D00016DD6C0344063210100ED4D6183AB58FA4
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.16.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.16.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:02
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_018.image_i_bg_black
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:03
Write : Processing rm470__13.10_ISM_018.image_i_bg_black
Total writen 205 blocks
TIME : Write time : 00:00:03
CNT Write done
ADL: Request programm status
NAND status : 00000000 / 00000000 / 00000000
ADL: Close_Session
Content: 000300000000000000000000000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:16
Reboot phone now...
Afterflash not selected, skip
Done!
Elapsed: 00:00:25
Connect phone on selected interface...
После сея девайс не входит в Local и при нажатии кнопки вкл,запуск не проходит,тускло горит подсветка экрана.....
Всё это было только с одним ТА,после решил выяснить,и решил такими же манипуляциями других, абсолютно рабочих 6700 пролить....Результат как и у первого....:
Что не так?