PDA

Просмотр полной версии : Релиз SETooL 1.12



GSM™
26.10.2011, 00:32
v1.12



- added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
- added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
resurrection procedure will be described in FAQ later,
however, in short it is standard "recovery+write gdfs+unlocking" chain.

7227,8250-based phones require special uart cables ( pinout included in docs ),
however it is highly recommended to use special GPG cables (http://www.gpgindustries.com/news/2011/10/25/gpgindustries-proudly-present-qualcomm-resurrection-cables-featuring-setool-box/)
8x55-based phones does not require any special cables.

as side effect, imei change possible now for s1 qualcomm-based phones.
for 7227,8250-based phones need select COM as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking, use testpoint (gnd type) )
for 8x50-based phones need select USB as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking )

cost of imei change 5 credits, please take in mind, that if you change imei, phone need to be unlocked,
so add another 5 credits for unlock procedure.
if you have calculated signature for some imei, then you can save 5 credits for unlocking ;)

- added few models to model list, so users don't get confused
- different bugfixes


RapidShare Link (https://rapidshare.com/files/633667618/v1.12.rar)