nikolyan
06.01.2012, 18:11
Проблема следующая:
При совершении звонка через 1-2 мин разговора аппарат зависает, при этом в динамике жуткий свист, хрип и аппарат перезагружается.
Механических повреждений и следов попадания жидкости не выявлено.
Прошил BEST'ом, проблема осталась,
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Core version : 1.30 Rev : 1.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-356_60.0.003_prd.core.C00
PPM : RM-356_60.0.003_prd.rofs2.V05
PPM2 : RM-356_60.0.003_C01_prd.rofs3.fpsx
CNT : RM-356_60.0.001_026_000_U01.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0420010C55940052DEEB0B8803E747DED6BBE1F6
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:42
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-356_60.0.003_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.core.C00
Total 510 [510/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:02:13
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-356_60.0.003_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x07180000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.rofs2.V05
Total 116 [116/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:34
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-356_60.0.003_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_C01_prd.rofs3.fpsx
Total 11 [11/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:01
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F71FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Total 29 [29/0/0] blocks to write, writing...
TIME : Write time : 00:00:09
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:02:59
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: Error
IMEI: Error
Ape Version: V 60.0.003
Product code: Error
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
Read Info Done!
AfterFlash operations done ;D
Done!
Elapsed: 00:04:36
Connect phone on selected interface...
при чем при подключении аппарата в обычном режиме зависает программатор, писал в dead mode,
так же после прошивки, как видно по логу, тоже завис, не вычитал данных, пришлось выдернуть шнурок.
Селф-тест:
Initializing Tests...
IMEI : 352012048643687 , Phone : RM-356 Nokia 5800 XpressMusic
Get keys...
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_IO_CTRL_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_IIC_TEST
PASSED | ST_EXT_DEVICE_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_WCDMA_TX_POWER_TEST
PASSED | ST_CDSP_RX_IQ_LOOP_BACK_TEST
PASSED | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_CAMERA_ACCELERATOR_TEST
PASSED | ST_SEC_CAMERA_IF_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_CAMERA_AUTOFOCUS_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_TOUCH_STUCK_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_WLAN_TEST
PASSED | ST_BT_WLAN_COEXISTENCE_TEST
PASSED | ST_TOUCH_IF_TEST
PASSED | ST_ACCEL_IF_TEST
PASSED | ST_LCD_CONTROLLER_TEST
PASSED | ST_VIBRA_TEST
PASSED | ST_USB_LOOP_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_TVOUT_IF_TEST
PASSED | ST_IO_EXPANDER_IF_TEST
SelfTests end
Done!
Elapsed: 00:04:57
129961 129962 129963
на моей практике такое впервые, в форуме на свои вопросы ответа не нашел.
ЗЫ: Через адаптер прошился без проблем.
При совершении звонка через 1-2 мин разговора аппарат зависает, при этом в динамике жуткий свист, хрип и аппарат перезагружается.
Механических повреждений и следов попадания жидкости не выявлено.
Прошил BEST'ом, проблема осталась,
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Core version : 1.30 Rev : 1.1
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM-356_60.0.003_prd.core.C00
PPM : RM-356_60.0.003_prd.rofs2.V05
PPM2 : RM-356_60.0.003_C01_prd.rofs3.fpsx
CNT : RM-356_60.0.001_026_000_U01.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006400C192101031103
CPU ID : RAPIDOv11 , Features : Dead-Test, USBRPL, WR/ER-USB
EM0 ID: 00000296
EM1 ID: 00000B22
PUBLIC ID: 0420010C55940052DEEB0B8803E747DED6BBE1F6
ASIC MODE ID: 00
ROOT KEY HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
ROM ID: 4B9B75103E691FF8
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing RAP3NAND ...
Processing PASUBTOC ...
Processing PAPUBKEYS...
Processing UPDAPP ...
Boot Done! :)
TIME : Boot time : 00:00:42
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Auth done...
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing RM-356_60.0.003_prd.core.C00
Found 5 areas to erase
Erasing area 0x00040000 - 0x00082FFF, NAND, CMT
Result: 0000
Erasing area 0x00083400 - 0x003FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00400000 - 0x007FFFFF, NAND, CMT
Result: 0000
Erasing area 0x00800000 - 0x00D5FFFF, NAND, CMT
Result: 0000
Erasing area 0x00D60000 - 0x09E5FFFF, NAND, CMT
Result: 0000
Erase partition 0x0A
Partition erase Ok
Partitioning : Ok [5]
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.core.C00
Total 510 [510/0/0] blocks to write, writing...
CMT : Writing Hash CERT [ADA]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [RAP3NAND]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [SOS*UPDAPP]
CMT : Writing Hash CERT [SOS*ENO]
CMT : Writing Hash CERT [SOS*DSP0]
CMT : Writing Hash CERT [SOS*ISASW]
CMT : Writing Hash CERT [SOS+CORE]
CMT : Writing Hash CERT [SOS+ROFS1]
TIME : Write time : 00:02:13
MCU Write done
===Flashing [PPM]===
Erase : Processing RM-356_60.0.003_prd.rofs2.V05
Found 1 areas to erase
Erasing area 0x07180000 - 0x0915FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_prd.rofs2.V05
Total 116 [116/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS2]
TIME : Write time : 00:00:34
PPM Write done
===Flashing [PPM2]===
Erase : Processing RM-356_60.0.003_C01_prd.rofs3.fpsx
Found 1 areas to erase
Erasing area 0x09160000 - 0x09E5FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.003_C01_prd.rofs3.fpsx
Total 11 [11/0/0] blocks to write, writing...
CMT : Writing Hash CERT [SOS+ROFS3]
TIME : Write time : 00:00:01
PPM Write done
===Flashing [CNT]===
Erase : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Found 1 areas to erase
Erasing area 0x09E60000 - 0x0F71FFFF, NAND, CMT
Result: 0000
TIME : Erase time : 00:00:00
Write : Processing RM-356_60.0.001_026_000_U01.uda.fpsx
Total 29 [29/0/0] blocks to write, writing...
TIME : Write time : 00:00:09
CNT Write done
=================
ADL : End flashing
ADL : Finalize...
Flashing done!
Total flash time : 00:02:59
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: Error
IMEI: Error
Ape Version: V 60.0.003
Product code: Error
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
Read Info Done!
AfterFlash operations done ;D
Done!
Elapsed: 00:04:36
Connect phone on selected interface...
при чем при подключении аппарата в обычном режиме зависает программатор, писал в dead mode,
так же после прошивки, как видно по логу, тоже завис, не вычитал данных, пришлось выдернуть шнурок.
Селф-тест:
Initializing Tests...
IMEI : 352012048643687 , Phone : RM-356 Nokia 5800 XpressMusic
Get keys...
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_IO_CTRL_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_IIC_TEST
PASSED | ST_EXT_DEVICE_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_PWR_DETECTOR_BIAS_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_WCDMA_TX_POWER_TEST
PASSED | ST_CDSP_RX_IQ_LOOP_BACK_TEST
PASSED | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_CAMERA_ACCELERATOR_TEST
PASSED | ST_SEC_CAMERA_IF_TEST
PASSED | ST_LED_FLASH_TEST
PASSED | ST_CAMERA_AUTOFOCUS_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_TOUCH_STUCK_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_WLAN_TEST
PASSED | ST_BT_WLAN_COEXISTENCE_TEST
PASSED | ST_TOUCH_IF_TEST
PASSED | ST_ACCEL_IF_TEST
PASSED | ST_LCD_CONTROLLER_TEST
PASSED | ST_VIBRA_TEST
PASSED | ST_USB_LOOP_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_TVOUT_IF_TEST
PASSED | ST_IO_EXPANDER_IF_TEST
SelfTests end
Done!
Elapsed: 00:04:57
129961 129962 129963
на моей практике такое впервые, в форуме на свои вопросы ответа не нашел.
ЗЫ: Через адаптер прошился без проблем.