Nokia 6700 Contact service

[nikolyan]

Изначально аппарат не включался,
после прогрева бутерброда и прошивки сразу после запуска Contact service и выключается.
Прочитал много чего интересного по этому поводу,
но может что-то делаю не так?
Логи:



Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_018.image_i_ua_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 2480020D92A8034414B4EE47C54BF018CDAD7D20
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355364040582521
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\355364040582521_CRT_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:29
MCU Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_018.image_i_ua_black
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:07
Write : Processing rm470__13.10_ISM_018.image_i_ua_black
Total writen 205 blocks
TIME : Write time : 00:00:29
CNT Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000280000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:16
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 13.10 16-06-10 RM-470 (c) Nokia
IMEI: 355364040582521
PPM version : V 13.10 16-06-10 RM-470 (c) Nokia I
Product code: 0571173
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!

Elapsed: 00:02:19



Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok


Processing Server SX4 Auth
Checking SDD key...
Check SD : Key is Ok
Operating mode is OK, no need change...
Connecting to server...
Connect to server Ok, checking
SX4 Server : Online, ver:1.04 , Infinity Team (c) 2011
SX4, processing Step #1
SX4, processing Step #2
SX4, processing Step #3
SX4 Result : Ok

Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-470.pm
Operating mode is OK, no need change...

Field 1
Record 0 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 13 write - Ok
Record 16 write - Ok
Record 18 write - Ok
Record 20 write - Ok
Record 22 write - Ok
Record 23 write - Ok
Record 24 write - Ok
Record 26 write - Ok
Record 28 write - Ok
Record 29 write - Ok
Record 31 write - Ok
Record 33 write - Ok
Record 34 write - Ok
Record 35 write - Ok
Record 37 write - Ok
Record 39 write - Ok
Record 40 write - Ok
Record 41 write - Ok
Record 42 write - Ok
Record 43 write - Ok
Record 44 write - Ok
Record 45 write - Ok
Record 46 write - Ok
Field 2
Record 0 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 17 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:00

Upload done


Селф тест:



Initializing Tests...
IMEI : 355364040589821 , Phone : RM-470 Nokia 6700 classic
Get keys...
PASSED | ST_TAHVOINT_TEST
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
->ERROR | ST_SIM_LOCK_TEST
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKLIGHT_TEST
PASSED | ST_BACKUP_BATT_TEST
PASSED | ST_LCD_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
->ERROR | ST_CAMERA_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
->ERROR | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_ACCELEROMETER_TEST
NOT RUN | ST_USB_LOOP_TEST
->ERROR | ST_CAMERA_AUTOFOCUS_TEST
MINOR | ST_LED_FLASH_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_LED_CONTROLLER_TEST
PASSED | ST_USB_CHARGER_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end
Done!

[uo5oq]

Если CS непосредственно сразу после ВКЛ (без подтверждения вкл), то надо ещё попаять.

[swmobile]

Смущает вот это

->ERROR | ST_SIM_LOCK_TEST

[PFFF]

Лог Check покажите.

[rostik1970]

Смущает вот это

->ERROR | ST_SIM_LOCK_TEST

Да и это...SimLock status : SimLock Damaged!!!!! :(

[PFFF]

SimLock status : SimLock Damaged!!!!! :(

Хотя да, и без чека всё ясно:
1. Заказ RPL
2. Замена пары.

[golova]

Хотя да, и без чека всё ясно:
Да вот как раз чека, вернее лога инфы не хватает. Второй лог говорит, что сервак исправил ST, блоки PM залиты. А вообще uo5oq правильно заметил, если CS до подтверждения включения, то проблема наверняка железная. Случалось у меня такое пару раз ( правда не с 6700 ) , помогала перекатка.

[nikolyan]

В CS выпадает после подтверждения включения.
Сегодня еще раз тщательно пропаял бутерброд, прошил,
то же самое.


Reading Phone Info....
Connected phone - Nokia 6700 classic
Software ver : V 13.10 16-06-10 RM-470 (c) Nokia
IMEI : 355364040582521
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR81_10w09
APE Test:
PPM : V 13.10 16-06-10 RM-470 (c) Nokia I
CNT : Content: i_ua_black V 13.10 16-06-10 RM-470 (c) Nokia
Product SN : KFW635194
Product code : 0571173
Base Prd.code: 0590482
Module code : 0204199
Long Prod.SN : 0
Hardware info=======
HWID : 1010
Retu : 34
Tahvo : 00
Batery: 3920 mV
Camera:
CMT BT: 410B-v190
APE BT:
APE HW:
LCDVer: TPO
RF ic :
Lock info ===========
IMEI : 355364040582521
IMEI spNet : 3A 55 63 04 04 85 52 02
IMEI svNet : 33 55 63 04 04 85 52 42 F6

Unable to read Lock table... :(
CRT308 Backup Created

User Code : яяяяяяяяяя
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!


Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok

SimLock status : SimLock Damaged!!!!! :(
- > Do REPAIR SL if it SL2/SL phone, if SL3 - Help Only Backup Or RPL

Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15

Done!


Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm470__13.10.mcusw
PPM : rm470__13.10.ppm_i
CNT : rm470__13.10_ISM_018.image_i_ua_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00000C34
EM1 ID: 00000C30
PUBLIC ID: 2480020D92A8034414B4EE47C54BF018CDAD7D20
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400098
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : CABA40E42B6F3B8A6EFEE35B4A9D15924EB132C6
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355364040582521
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\355364040582521_CRT_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm470__13.10.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm470__13.10.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 218 blocks
TIME : Write time : 00:00:29
MCU Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

===Flashing [PPM]===
Erase : Processing rm470__13.10.ppm_i
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm470__13.10.ppm_i
Total writen 52 blocks
TIME : Write time : 00:00:07
PPM Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

===Flashing [CNT]===
Erase : Processing rm470__13.10_ISM_018.image_i_ua_black
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:07
Write : Processing rm470__13.10_ISM_018.image_i_ua_black
Total writen 205 blocks
TIME : Write time : 00:00:28
CNT Write done
ADL: Request programm status
NAND status : 00000028 / 00000000 / 00000000

ADL: Close_Session
Content: 000300000000280000000000000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:15
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6700 classic
Software Info: V 13.10 16-06-10 RM-470 (c) Nokia
IMEI: 355364040582521
PPM version : V 13.10 16-06-10 RM-470 (c) Nokia I
Product code: 0571173
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 34 certs
Data exist, skip certificate repair...
AfterFlash operations done ;D
Done!

Elapsed: 00:02:15
Connect phone on selected interface...


Пока висит на шнурке в local mode все время выскакивает сообщение в трее "найдено новое оборудование MTP Device"


SimLock status : SimLock Damaged!!!!! :(

Хотя да, и без чека всё ясно:
1. Заказ RPL
2. Замена пары.

Как вариант.

[vadimKol]

снеси NPC ему и проверь включается или нет, сеть видет и тд
а потом только заказыват RPL

[nikolyan]

снеси NPC ему и проверь включается или нет, сеть видет и тд
а потом только заказыват RPL

Снес.
Включился.
Сетки нет.

[uo5oq]

Снес.
Включился.
Сетки нет.
Надо внимательнее читать форум!
Сразу бы так сделали: Важно: Тотальный ремонт ПО Nokia BB5 SL3 без заказа RPL (http://www.mobile-files.ru/forum/showthread.php?t=295974)