Loooser
09.02.2012, 13:15
Апарат не видел сим писал что то щас непомню на форуме было написано это ПО
Стал шить вот что
---Processing MCU image---
Processing NOL part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_20.2010.36-2_PR_MR0
RootFs flash Ok
Processing CMT part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok
Switch : OSSO UART+USB
Version : RX-51_2009SE_20.2010.36-2_PR_MR0
Switch CMT request Ok
CMT : Erasing...
Подскажите кто такое прошивал может я что то нетак делаю?
Делал как в видео прилагаю.
Вот что происходит родным дальше незнаю что делать
Вот что другим флешером происходит незнаю что делать
Microsoft Windows XP [Версия 5.1.2600]
(С) Корпорация Майкрософт, 1985-2001.
C:\Documents and Settings\Serg>cd c:\program files\flash
Системе не удается найти указанный путь.
C:\Documents and Settings\Serg>cd c:\program files\maemo\flasher-3.5
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -f RX-51_2009SE_20.2010.36-2.
bin -f -r
flasher v2.5.2 (Sep 24 2009)
flasher-3.5.exe: option requires an argument -- r
Usage: flasher [OPTIONS]
Options:
-F, --fiasco=ARG Location of a FIASCO image
-k, --kernel=ARG Location of kernel image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root JFFS2 image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
--cmt-no-verify Disable verification of CMT programming
-x, --xloader=ARG Location of X-Loader image
-s, --secondary=ARG Location of NOLO secondary bootloader image
-2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
-u, --unpack[=ARG] Unpack a FIASCO image
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the board (e.g. after flashing NOLO)
-i, --read-device-id Print out the device type
-S, --serial-port=ARG Serial port used for cold flashing or "usb"
-I, --init-port Only initialize the serial port
-c, --cold-flash "Cold flash" the device
-h, --hw-revision=ARG Specify product code and HW revision
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--set-hw-revision[=ARG] Set HW revision override on device
--flash-only=ARG Flash only certain components
-U, --usb-device=ARG Specify USB device to use (bus:device address)
C:\Program Files\maemo\flasher-3.5>
C:\Program Files\maemo\flasher-3.5>к
"к" не является внутренней или внешней
командой, исполняемой программой или пакетным файлом.
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe-fRX-51_2009SE_20.2010.36-2.bi
n-f-r
"flasher-3.5.exe-fRX-51_2009SE_20.2010.36-2.bin-f-r" не является внутренней или
внешней
командой, исполняемой программой или пакетным файлом.
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -f RX-51_2009SE_20.2010.36-2.
bin -f -r
flasher v2.5.2 (Sep 24 2009)
flasher-3.5.exe: option requires an argument -- r
Usage: flasher [OPTIONS]
Options:
-F, --fiasco=ARG Location of a FIASCO image
-k, --kernel=ARG Location of kernel image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root JFFS2 image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
--cmt-no-verify Disable verification of CMT programming
-x, --xloader=ARG Location of X-Loader image
-s, --secondary=ARG Location of NOLO secondary bootloader image
-2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
-u, --unpack[=ARG] Unpack a FIASCO image
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the board (e.g. after flashing NOLO)
-i, --read-device-id Print out the device type
-S, --serial-port=ARG Serial port used for cold flashing or "usb"
-I, --init-port Only initialize the serial port
-c, --cold-flash "Cold flash" the device
-h, --hw-revision=ARG Specify product code and HW revision
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--set-hw-revision[=ARG] Set HW revision override on device
--flash-only=ARG Flash only certain components
-U, --usb-device=ARG Specify USB device to use (bus:device address)
C:\Program Files\maemo\flasher-3.5>
Стал шить вот что
---Processing MCU image---
Processing NOL part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : xloader , 1.4.14.9+0m5
Processing : secondary , 1.4.14.9+0m5
NOL part Ok, boot flash done
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : kernel , 2.6.28-20103103+0m5
Kernel flash Ok
Processing APE part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : rootfs , RX-51_2009SE_20.2010.36-2_PR_MR0
RootFs flash Ok
Processing CMT part
File : RX-51_2009SE_20.2010.36-2_PR_COMBINED_MR0_ARM.bin
Processing : cmt-2nd , BB5_09.36
Processing : cmt-algo , BB5_09.36
Processing : cmt-mcusw , rx51_ICPR82_10w08
CMT part prepare Ok, files are sent
Program CMT request Ok
Switch : OSSO UART+USB
Version : RX-51_2009SE_20.2010.36-2_PR_MR0
Switch CMT request Ok
CMT : Erasing...
Подскажите кто такое прошивал может я что то нетак делаю?
Делал как в видео прилагаю.
Вот что происходит родным дальше незнаю что делать
Вот что другим флешером происходит незнаю что делать
Microsoft Windows XP [Версия 5.1.2600]
(С) Корпорация Майкрософт, 1985-2001.
C:\Documents and Settings\Serg>cd c:\program files\flash
Системе не удается найти указанный путь.
C:\Documents and Settings\Serg>cd c:\program files\maemo\flasher-3.5
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -f RX-51_2009SE_20.2010.36-2.
bin -f -r
flasher v2.5.2 (Sep 24 2009)
flasher-3.5.exe: option requires an argument -- r
Usage: flasher [OPTIONS]
Options:
-F, --fiasco=ARG Location of a FIASCO image
-k, --kernel=ARG Location of kernel image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root JFFS2 image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
--cmt-no-verify Disable verification of CMT programming
-x, --xloader=ARG Location of X-Loader image
-s, --secondary=ARG Location of NOLO secondary bootloader image
-2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
-u, --unpack[=ARG] Unpack a FIASCO image
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the board (e.g. after flashing NOLO)
-i, --read-device-id Print out the device type
-S, --serial-port=ARG Serial port used for cold flashing or "usb"
-I, --init-port Only initialize the serial port
-c, --cold-flash "Cold flash" the device
-h, --hw-revision=ARG Specify product code and HW revision
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--set-hw-revision[=ARG] Set HW revision override on device
--flash-only=ARG Flash only certain components
-U, --usb-device=ARG Specify USB device to use (bus:device address)
C:\Program Files\maemo\flasher-3.5>
C:\Program Files\maemo\flasher-3.5>к
"к" не является внутренней или внешней
командой, исполняемой программой или пакетным файлом.
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe-fRX-51_2009SE_20.2010.36-2.bi
n-f-r
"flasher-3.5.exe-fRX-51_2009SE_20.2010.36-2.bin-f-r" не является внутренней или
внешней
командой, исполняемой программой или пакетным файлом.
C:\Program Files\maemo\flasher-3.5>flasher-3.5.exe -f RX-51_2009SE_20.2010.36-2.
bin -f -r
flasher v2.5.2 (Sep 24 2009)
flasher-3.5.exe: option requires an argument -- r
Usage: flasher [OPTIONS]
Options:
-F, --fiasco=ARG Location of a FIASCO image
-k, --kernel=ARG Location of kernel image
-n, --initfs=ARG Location of initfs image
-r, --rootfs=ARG Location of root JFFS2 image
--cmt-2nd=ARG Location of CMT FIASCO 2nd image
--cmt-algo=ARG Location of CMT FIASCO algorithm image
--cmt-mcusw=ARG Location of CMT FIASCO MCUSW image
--cmt-no-verify Disable verification of CMT programming
-x, --xloader=ARG Location of X-Loader image
-s, --secondary=ARG Location of NOLO secondary bootloader image
-2, --2nd=ARG Location of NOLO cold flasher ("2nd") image
-u, --unpack[=ARG] Unpack a FIASCO image
-f, --flash Load and flash all supplied images
-l, --load Only load all supplied images
-b, --boot[=ARG] Boot the kernel with optional cmdline
-R, --reboot Reboot the board (e.g. after flashing NOLO)
-i, --read-device-id Print out the device type
-S, --serial-port=ARG Serial port used for cold flashing or "usb"
-I, --init-port Only initialize the serial port
-c, --cold-flash "Cold flash" the device
-h, --hw-revision=ARG Specify product code and HW revision
--enable-rd-mode Enable R&D mode on the device
--disable-rd-mode Disable R&D mode on the device
--set-rd-flags[=ARG] Set R&D mode flags on the device
--clear-rd-flags[=ARG] Clear R&D mode flags on the device
--query-rd-mode Query the device R&D mode status and flags
--set-hw-revision[=ARG] Set HW revision override on device
--flash-only=ARG Flash only certain components
-U, --usb-device=ARG Specify USB device to use (bus:device address)
C:\Program Files\maemo\flasher-3.5>