asrar
07.10.2012, 01:05
Всем привет.
Тело поступин с перезагрузкой на заставке GOOGLE Я хотел прошыть но он в download незаходил подцепил к рифу и востановил бут но теперь в download входит но не прошивается (особенно бут не шьётся висит и ошибка выскаивает)
[CODE]Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung I9023 V1.00]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead ************...OK
[COLOR="Red"]WARNING: Programming Error (0x24) at 0x000000680000 is handled as Cut Excess.
Resurrection complete!
Попробул с ort repair зделал но не прошивается
лог odin-1.81
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/053> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> bootloader.img
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/053> Removed!!
<ID:0/053> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> bootloader.img
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/053> Removed!!
лог прошивки z3x
Searching USB Flash Interface... detected COM53
Opening Port... Error
Done with Samsung Tool ver 12.7
File analysis... OK
Total File Size: 0x0C2391A4
Searching USB Flash Interface... detected COM53
Opening Port... OK
Setup connection... OK
Reading PIT From Phone... OK
Sending bootloader.img... Error
Done with Samsung Tool ver 12.7
Тело поступин с перезагрузкой на заставке GOOGLE Я хотел прошыть но он в download незаходил подцепил к рифу и востановил бут но теперь в download входит но не прошивается (особенно бут не шьётся висит и ошибка выскаивает)
[CODE]Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung I9023 V1.00]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead ************...OK
[COLOR="Red"]WARNING: Programming Error (0x24) at 0x000000680000 is handled as Cut Excess.
Resurrection complete!
Попробул с ort repair зделал но не прошивается
лог odin-1.81
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/053> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> bootloader.img
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/053> Removed!!
<ID:0/053> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Bootloader_I9023XXKA3.tar.md5 is valid.
<OSM> PDA_SOJU_GRJ22_TMO_EUR_MR2_SIGNED.tar.md5 is valid.
<OSM> MODEM_I9023XXKD1_REV_00_CL990283_SIGNED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/053> Odin v.3 engine (ID:53)..
<ID:0/053> File analysis..
<ID:0/053> SetupConnection..
<ID:0/053> Initialzation..
<ID:0/053> Get PIT for mapping..
<ID:0/053> Firmware update start..
<ID:0/053> bootloader.img
<ID:0/053>
<ID:0/053> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/053> Removed!!
лог прошивки z3x
Searching USB Flash Interface... detected COM53
Opening Port... Error
Done with Samsung Tool ver 12.7
File analysis... OK
Total File Size: 0x0C2391A4
Searching USB Flash Interface... detected COM53
Opening Port... OK
Setup connection... OK
Reading PIT From Phone... OK
Sending bootloader.img... Error
Done with Samsung Tool ver 12.7