Wildfire s востановление бут через Usb

[kubikrubik]

может кто знает как востоновить бут через USB или Box

[tarik316]

Вы вообще мануал читали?

To resurrect HTC WildFireS:
Ø Solder JTAG cable to HTC WildFireS JTAG pads;
Ø Insert USB Data cable into board and PC;
Ø Make sure HTC WildFireS is selected in the list of models;
Ø If you use battery, press Power On key;
Ø Click Resurrect button;
Ø Wait till software signals a successful operation completion;
Ø Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:
v Disconnect PC cable;
v Insert battery;
v Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.

[Bogov]

Вы вообще мануал читали?

To resurrect HTC WildFireS:
Ø Solder JTAG cable to HTC WildFireS JTAG pads;
Ø Insert USB Data cable into board and PC;
Ø Make sure HTC WildFireS is selected in the list of models;
Ø If you use battery, press Power On key;
Ø Click Resurrect button;
Ø Wait till software signals a successful operation completion;
Ø Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:
v Disconnect PC cable;
v Insert battery;
v Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.
А это мануал работы чего?

[tarik316]

А это мануал работы чего?

Мануал по работе Riff с этой моделью. (ТС в соседней теме просит фулл на эту модель под рифф)