Jagupop
20.05.2015, 00:29
При попытке Resurrect выдает:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire 601 (04PE21000) V1.0.5149.18119]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x2072D0E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 7,28GB
Flashing the dead ************...
ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000
Объем памяти на этот раз вроде нормальный показывает - 7.28 GB. Что на этот раз ему мешает? Спасибо!
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [HTC Desire 601 (04PE21000) V1.0.5149.18119]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x2072D0E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM08G, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM08G, 0x000000200000 Bytes = 2.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 7,28GB
Flashing the dead ************...
ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000000000
Объем памяти на этот раз вроде нормальный показывает - 7.28 GB. Что на этот раз ему мешает? Спасибо!