PDA

Просмотр полной версии : ZTE Blade X3 (T620) MT6735M frp lock



DeeJay_145
13.07.2016, 13:23
Привет всем. Принесли ZTE Blade X3 (T620) стоит FRP блокировка хотел открыт через nckdongle не получился вот логи:

Exe version: NCKDongle AndroidMTK 2.5.6.6
Selected model: MT6735M
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data....wait!

Error: S_DA_SDMMC_CONFIG_FAILED
[3147]Error: S_DA_SDMMC_CONFIG_FAILED
Wait untill phone will start charging.
All done.

DeeJay_145
14.07.2016, 03:23
Реято всё решил проблему cm2 помог за 10-секунд

Burzum_666
14.07.2016, 07:22
Реято всё решил проблему cm2 помог за 10-секунд

Можно и ручками всё сделать..через флештул стереть..
Старт: 0x6a00000 и Длина: 0x100000

DeeJay_145
14.07.2016, 10:33
Можно и ручками всё сделать..через флештул стереть..
Старт: 0x6a00000 и Длина: 0x100000

Так я пробовал. но флештул телефон не определял!
Можно и с nckdongle сделать но придется адрес ввести вручную.

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM77)
FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
Wait untill phone will start charging.
All done.