matero
12.10.2017, 16:28
Решил продублировать сюда. Первоисточник (http://forum.gsmhosting.com/vbb/f929/guide-unbrick-flash-y625-u32-encunsuccess-9008-a-2122973/)
Единственное что имей поправил немного попроще.
Родная флеша увиделась, но считать с нее невозможно.
Поэтому правим конфиг на
---------- eMMC Device Information ----------
EMMC CID : 45010053454D30344740B21D98A0B216
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 11/2015 Rev.0x40
EMMC NAME: SEM04G , S/N: 2988284064
EMMC NAME (HEX): 53454D30344700
EMMC ROM1 (Main User Data) Capacity: 3776 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x01
Device support partitioning feature
Device cannot have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SEM04G_2988284064_20170925_1924.extcsd
mmc_read_blocks(0x75FFFF , 1 ), Reason: CARD Data FIFO Timeout Error
Caution: invalid backup GPT header, but valid main header!
Partition table scan:
GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: 760000 sectors 3.7 GiB
Soft (Partitioned) Disk/Image size: 75FFBC sectors 3.7 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 7733214
Found Data areas (firmware parts) count is: 21
Partition info successfully found
---------------------------------------------
P0 (SBL1) [0x4400 0x80000] Size: 512.0KB
P1 (SDI) [0x84400 0x20000] Size: 128.0KB
P2 (ABOOT) [0xa4400 0x80000] Size: 512.0KB
P3 (RPM) [0x124400 0x7d000] Size: 500.0KB
P4 (TZ) [0x1a1400 0x7d000] Size: 500.0KB
P5 (PAD) [0x21e400 0x100000] Size: 1.0MB
P6 (MODEMST1) [0x31e400 0x180000] Size: 1.500MB
P7 (MODEMST2) [0x49e400 0x180000] Size: 1.500MB
P8 (MISC) [0x61e400 0x100000] Size: 1.0MB
P9 (FSC) [0x71e400 0x400] Size: 1.0KB
P10 (SSD) [0x71e800 0x2000] Size: 8.0KB
P11 (MODEM) [0x4000000 0x4000000] Size: 64.0MB
P12 (DDR) [0x8000000 0x8000] Size: 32.0KB
P13 (BOOT) [0x8008000 0xa00000] Size: 10.0MB
P14 (SYSTEM) [0x8a08000 0x57800000] Size: 1.367GB
P15 (PERSIST) [0x60208000 0x2000000] Size: 32.0MB
P16 (CACHE) [0x62208000 0x6599800] Size: 101.599MB
P17 (RECOVERY) [0x687a1800 0xa00000] Size: 10.0MB
P18 (LOGO) [0x691a1800 0x600000] Size: 6.0MB
P19 (FSG) [0x697a1800 0x180000] Size: 1.500MB
P20 (USERDATA) [0x69921800 0x826da600] Size: 2.37GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0008A08000 (1.367GB)
Build ID: HUAWEIY625-U32
Display Build ID: Y625-U32V100R001C479B107
Release ID: 4.4.2
Device Model: HUAWEI Y625-U32
Device Name: Y625-U32
Architecture ABI: armeabi-v7a
Device manufacturer: HUAWEI
Device Platform: msm8610
Product ID: 8212
Build Description: 8212-user 4.4.2 HUAWEIY625-U32 C479B107 ota-rel-keys,release-keys
---------------------------------------------
Done.
припаиваем подготовленную флешу на плату
177882
и зашиваем Y625-U32V100R001C479B106
через Qulcommm_download_8x10_V1.0_20131226
177879
https://yadi.sk/d/odKcwv0p3NgwqV
Никакого тест поинта мыкать не надо, увидется как 9008
Включаем аппарат и делаем сброс настроек после чего переразметится память и увидет доступную память
177881177883
родные imei вписываем прогой IMEI Write tool
177884
177885
Единственное что имей поправил немного попроще.
Родная флеша увиделась, но считать с нее невозможно.
Поэтому правим конфиг на
---------- eMMC Device Information ----------
EMMC CID : 45010053454D30344740B21D98A0B216
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 11/2015 Rev.0x40
EMMC NAME: SEM04G , S/N: 2988284064
EMMC NAME (HEX): 53454D30344700
EMMC ROM1 (Main User Data) Capacity: 3776 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x01
Device support partitioning feature
Device cannot have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SEM04G_2988284064_20170925_1924.extcsd
mmc_read_blocks(0x75FFFF , 1 ), Reason: CARD Data FIFO Timeout Error
Caution: invalid backup GPT header, but valid main header!
Partition table scan:
GPT: damaged
Caution: Found protective or hybrid MBR and corrupt GPT.
Real (Hardware) Disk/Image size: 760000 sectors 3.7 GiB
Soft (Partitioned) Disk/Image size: 75FFBC sectors 3.7 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 7733214
Found Data areas (firmware parts) count is: 21
Partition info successfully found
---------------------------------------------
P0 (SBL1) [0x4400 0x80000] Size: 512.0KB
P1 (SDI) [0x84400 0x20000] Size: 128.0KB
P2 (ABOOT) [0xa4400 0x80000] Size: 512.0KB
P3 (RPM) [0x124400 0x7d000] Size: 500.0KB
P4 (TZ) [0x1a1400 0x7d000] Size: 500.0KB
P5 (PAD) [0x21e400 0x100000] Size: 1.0MB
P6 (MODEMST1) [0x31e400 0x180000] Size: 1.500MB
P7 (MODEMST2) [0x49e400 0x180000] Size: 1.500MB
P8 (MISC) [0x61e400 0x100000] Size: 1.0MB
P9 (FSC) [0x71e400 0x400] Size: 1.0KB
P10 (SSD) [0x71e800 0x2000] Size: 8.0KB
P11 (MODEM) [0x4000000 0x4000000] Size: 64.0MB
P12 (DDR) [0x8000000 0x8000] Size: 32.0KB
P13 (BOOT) [0x8008000 0xa00000] Size: 10.0MB
P14 (SYSTEM) [0x8a08000 0x57800000] Size: 1.367GB
P15 (PERSIST) [0x60208000 0x2000000] Size: 32.0MB
P16 (CACHE) [0x62208000 0x6599800] Size: 101.599MB
P17 (RECOVERY) [0x687a1800 0xa00000] Size: 10.0MB
P18 (LOGO) [0x691a1800 0x600000] Size: 6.0MB
P19 (FSG) [0x697a1800 0x180000] Size: 1.500MB
P20 (USERDATA) [0x69921800 0x826da600] Size: 2.37GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0008A08000 (1.367GB)
Build ID: HUAWEIY625-U32
Display Build ID: Y625-U32V100R001C479B107
Release ID: 4.4.2
Device Model: HUAWEI Y625-U32
Device Name: Y625-U32
Architecture ABI: armeabi-v7a
Device manufacturer: HUAWEI
Device Platform: msm8610
Product ID: 8212
Build Description: 8212-user 4.4.2 HUAWEIY625-U32 C479B107 ota-rel-keys,release-keys
---------------------------------------------
Done.
припаиваем подготовленную флешу на плату
177882
и зашиваем Y625-U32V100R001C479B106
через Qulcommm_download_8x10_V1.0_20131226
177879
https://yadi.sk/d/odKcwv0p3NgwqV
Никакого тест поинта мыкать не надо, увидется как 9008
Включаем аппарат и делаем сброс настроек после чего переразметится память и увидет доступную память
177881177883
родные imei вписываем прогой IMEI Write tool
177884
177885