Просмотр полной версии : Sagem myC-1 схема
питание не доходит до кнопки включение.
может у кого есть схема этого тела
Посмотри на yasikgsm.ru в narod.ru
Oxo_Boxo
14.07.2006, 12:58
@МОЛНИЯ
Power ON button are connected directly to ABB chip (TWL 3014)!
BR
Oxo_Boxo не понял что куда идет
Oxo_Boxo если есть выложи схему
Oxo_Boxo
15.07.2006, 01:51
Remove clued TWL3014 from phone PCB then reball it!
Check connection between POWER ON button and pin F8 (TWL 3014C - PWON)...
Solder again TWL3014 to board!
About shematic......you can use any TI HERCROM200 G2 based phone
- like as LG 7050 for examp...;)