Hello,
We are pleased to anounce MotoRocker v2.00 :
Major changes:
- Added smart card protection,
- Comunication interface changed to PC USB port
Updates:
- Added direct unlock for following models/versions:
* Motorola V557,
* Motorola C390,
* Motorola E1,
* Motorola E770, bootloader 650, 671, 682, 683, 684
* Motorola E1070 , bootloader 650, 671, 682, 683, 684
* Motorola V3x, bootloader 650, 671, 682, 683, 684, 690
* Motorola V3x Refresh, bootloader 650, 671, 682, 683, 684, 690
* Motorola V1150, bootloader 650, 671, 682, 683, 684
- Added "Read Phone Info" function
- Added "Reset subsidy password" function (now you can set unlock code to
"00000000" before flashing locked monster flash file)
- Added LP auto detection upon reading from phone (now lang pack is saved
with its version and lang pack number, eg -lp0001)
- Prepared around 10GB monster packs for various models, including image
files for phones with replaced flash chips (in total we will have around
60GB of flash files after upload is finished)
We are preparing more updates from now on - V3 model with bootloaders 8.27,
8.28 and 8.29 - due to lack of samples, and thanks to our customers who
were NOT helpfull with this mater by now, we havent finished it in time.
In order to use MotoRocker V2.00, You will need activated Rocker Dongle
connected, and ofcourse P2K drivers installed.
All needed files are uploaded to "Rocker Dongle" dir on
www.turbo-support.com members area.
Support acess software is going to be ready in shortest time.
Regards, Legija .
Ответить с цитированием