Подскажите, можно ли при помощи Griffin Box залить в тело (напр. 2100) Fullflash? Если можно, то как???
Подскажите, можно ли при помощи Griffin Box залить в тело (напр. 2100) Fullflash? Если можно, то как???
Ни как.
Очень жаль
Wn1
в 2100 ты и так можшь залить фулл флешь
Hi all
В принципе реально, но геморройно. Вот солюшка как это сделать, один раз я пробовал (заливал EEPROM) - получилось (в качестве спортивного интереса).
"NOTES: with this solution it´s possible to flash eeprom file to DCT3 phone! u cannot flash eeprom standalone, u must combinate it with PPM file!
--------------
NEEDED PROGZ:
1. good HEXEDITOR
2. NASNFCON DCT3 Flashconverter DOWNLOAD http://handy2k.nichtzucool.de/DCT3/nasNFCon.zip
3. eeprom file
4. MCU and PPM Files
5. DCT3 Flashadresses
----------------
INSTRUCTION:
1. check current MCU and PPM version on phone!
2. make a backup of the matching PPM file!
3. use flashconverter and convert PPM wintesla file into FLS file! 4. load FLS PPM file into hexeditor!
5. check filesize of PPM, it must exactly match to PPM ardress range! use windows calculator in hex Mode to check!!
6. load eeprom FLS file into hexeditor!
7. check filesize of EEPROM, must also match exactly to adress range!
8. if filesize are correct, copy eeprom to PPM file and save it (with other filename)
9. now open NASNFCON, and load this PPM-EEPROM combi file! 10. now you will see PPM infos! but offset and size is empty!
11. enter PPM staradress in OFFSET, format 0x??????, and then enter size of PPM/EEPROM combi file in size (0x??????) use hexeditor to check filesize! must be n*1000!
12. click convert to wintesla!
13. now rename this file into original PPM filename! (nhm6nx04.50b - for example)
14. now search model specific *.ini file in product subfolder! (nhm6.ini - for example)
15. also backup this file!
16. now search for this: EraseDefinedArea=1 LowEraseLimit=200000 HighEraseLimit=??????
17. edit HighEraseLimit to end adress of eeprom(fullflash)!
18. but u have to enter last flashable adress, for 600000 enter 5FFFFF, for 400000 enter 3FFFFF and so on!
19. save ini file and start griffin,select PPM/E2P combo file, and flash phone!
20. voila, eeprom is flashed!
_____________________________
but now u still need m2bus datacable to rebuild imei,FAID and SP lock settings!
_____________________________
if u want to flash normal PPM again, use backuped *.ini file, otherwise griffin will delete important infos on phone!!"