мож не так объяснил, используем ChineseMiracle, а шъем через ксинтел, вот лог
Код:
COM5 selected (здесь висит Xintel)
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:10C1:04FA
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 Ok
security area backup saved: id.A1FAD33A.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_22_19.BIN_2B03FBC1].rpl
identification#1 detection finished
device-id: A1FAD33A
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_22_19.BIN
ver. sw2: BR26_22.19
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
reading [flash[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_22_19.BIN]]...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
warning: wrong cs at 0x0012A800, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
error: wrong answer[45]
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
operation canceled by user
file saved: backup_system_log_A1FAD33A_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_22_19.BIN_2B03FBC1_20071211-022045.B0X.bin
Finished, time used: 181 sec
Remove/Install battery now !
и так на большенстве тел.
если хвост переделан под инфинити, проблемм нет, народ говорит что весь трабл в драйверах Prolific, на которых работает ксинтел, ставил патченные, старые-новые, без разницы...........