A75 не включается в нормал

[valeric2]

A75 После воды .Перекатал все BGA пропаял мелочевку.Мыл в ванночке без BGA.После замены стабилизатора питания флеш стал видиться и входить в сервис моде.Ну думаю прошью и ОК.Заливал различные фуллы пересчитывал ключи .Менял флешку на AMD (стояла spansion) тоже с A75 .В итоге с двумя разными флешками в сервис входит подсветка включается(програмно) Контраст меняется(програмно).После восстановления тест поинта свапом шьеться.Но су-ка не включается.При перводе в нормал моде джокером выдает ошибку EXIT: 4191 08 006C
ERR 6 (по идее софт)

[valeric2]

Короче вот лог ДЖОКЕРА

Start...
Already BFB mode!
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4412 mV!
SecurityMode: Customer
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4434 mV!
SecurityMode: Customer
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4434 mV!
SecurityMode: Customer
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Start...
Phone off!
Loading BootsModel(A75)...
StartBoot does not loded!
Start...
Loading BootsModel(A75)...
StartBoot does not loded!
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4431 mV!
SecurityMode: Customer
Skey not found in Joker.ini!
Send SKey(12345678)...
Phone Off.
SKey Send: Ok! All Open.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4434 mV!
SecurityMode: Factory
Light On...
Light On...
Test Contrast 102...
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4341 mV!
SecurityMode: Factory
Test Contrast 102...
Read Contrast...
Display1 contrast: 58, 68
Display2 contrast: 0, 0
Write contrast (95, 0) in block 5007...
Write block 5007 - Ok.
Display1 contrast: 95, 95
Display2 contrast: 0, 0
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4345 mV!
SecurityMode: Factory
Cancel.
Phone Off.
Send SKey: Error!
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4434 mV!
SecurityMode: Customer
Cancel.
Phone Off.
Send SKey: Error!
Light On...
No Ping mobile
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4442 mV!
SecurityMode: Factory
Send SKey(12345678)...
Phone Off.
SKey Send: Ok! All Close.
Light On...
No Ping mobile
Light On...
No Ping mobile
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4434 mV!
SecurityMode: Customer
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Start...
Cancel.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4427 mV!
SecurityMode: Customer
Light On...
SecurityMode: Customer
Work only in FactoryMode! Use Skey!
Start...
Already BFB mode!
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4404 mV!
SecurityMode: Customer
Send SKey(12345678)...
Phone Off.
SKey Send: Ok! All Open.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw20 19.05.05 14:07:25
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(0A): BootKEY misses in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4431 mV!
SecurityMode: Factory
Light On...
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Read Keys...
No Ping mobile
Get Info...
No Ping mobile
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

Start...
Loading BootsModel(A75)...
StartBoot does not loded!
Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A75 lg98 Sw20
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: EDC85747 -> PhoneID: 4757C8ED
OTP IMEI: 356474001299855
HASH: 47E9FB37B477CD3215BA5AEA1FFA473E
Read Flash addr: 0x800000 size: 0x800000 - Ok.
Data is written in "C:\Documents and Settings\UMS\Desktop\A75lg98Sw20_80-80_FF.bin" file.
Open file "D:\Siemens\A75\Ханюков_ориг\A75lg98Sw35_80-80_FF.bin" for write in Flash.
FullFlash file info:
FlashID: 0001/220C
SIEMENS A75 Sw35 lg98
RealLgPack: lg91
Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A75 lg98 Sw20
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: EDC85747 -> PhoneID: 4757C8ED
OTP IMEI: 356474001299855
HASH: 47E9FB37B477CD3215BA5AEA1FFA473E
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Change BCORE HASH - Ok.
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
Data file "D:\Siemens\A75\Ханюков_ориг\A75lg98Sw35_80-80_FF.bin".
Write Flash addr: 0x800000 size: 0x800000 - Ok.
Start...
Loading BootsModel(A75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com1 115200 BAUD: Ok.
SIEMENS A75 lg98 Sw35
Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201
Flash Size: 8Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: EDC85747 -> PhoneID: 4757C8ED
OTP IMEI: 356474001299855
HASH: 47E9FB37B477CD3215BA5AEA1FFA473E
Use OTP IMEI: 356474001299855
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
BCORE HASH is equivalent - not change.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\A75lg98Sw35_EEPROM_080124140317.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
BFB Speed 115200 Baud - Ok.
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(10): Minimal access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1C): Block 5123 is not found
Incorrect Battery Voltage! 4366 mV!
SecurityMode: Customer
Send SKey(12345678)...
Phone Off.
SKey Send: Ok! - Please Check up!
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
Light On...
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4267 mV.
SecurityMode: Factory
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4270 mV.
SecurityMode: Factory
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4270 mV.
SecurityMode: Factory
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4274 mV.
SecurityMode: Factory
Start...
Already BFB mode!
MobileMode: Service
HWID: 237 (A75)
A75 lg98 Sw35 20.09.05 10:01:20
IMEI: 356474001299855
DisplayID: 37, Philips Epson S1D15G14
FSN: EDC85747
SW FlashID: 0001/220C
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0D): Keys are registered in BCORE
Code(13): Complete access to BFB
Code(15): Complete condition
Code(19): Monitoring is switched on
Code(1D): Blocks 5121,5122,5123 are present
Battery Voltage 4274 mV.
SecurityMode: Factory
Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
The phone was switched off on an error:
EXIT: 4191 08 006C
ERR 6

[sphinxxx]

похоже на несоответствие типа фулла и флеши, хотя

Soft FlashID: 0001/220C
FlashID: 0001/227E-220C-2201

на всяк случай, пробуй другой фулл.

и вот еще почитай: http://forum.allsiemens.com/viewtopic.php?t=43430
и http://www.mobile-files.ru/forum/sho...r+6#post619756

[valeric2]

Да читал уже. А ошибка вываливается как при софтовой проблеме у A70 . А у меня A75 .Все способы какие знаю перепробовал .Может всетаки железо?Интересно в чем разница между двумя режимами сервис и нормал .По идее аппаратная часть работает если в сервис входит а вот на счет софта???

[sphinxxx]

Другого фулла нет? Я смотрю ты только один заливал...

[valeric2]

В архиве у себя был какой то фулл(рабочий) A75+фулл А75(бэкап моего кума+с этого сайта скачал +с сайта jonika(помоему) Короче 4 фулла лил в две разные флеши (AMD и SPANSION) .Итог один описан вверху.Просто лог не полный в сообщение не поместился(целый день шил, мыл, катал).

[asmax1]

От зарядки включается?.Варистор само собой может быть

[aaalll]

у меня похожая ситуация была из за битого Dialog

[sphinxxx]

Да, диалог вполне может косячить. И по моему туда только с буквами EB пойдет, но могу ошибаться.

[valeric2]

Да, диалог вполне может косячить. И по моему туда только с буквами EB пойдет, но могу ошибаться.

От зарядки не включается и диалог стоит именно EB (родной).Тело было непаяное(экраны видно что не подымали).На телефон опрокинули чашку кофе и окислов было немного, но похоже хватило.Попробую подкинуть диалог (может ROM на всякий случай).А вообще по всем признакам софт но что то мне подсказывает наверно аппаратная херня какая то.Вчера отдал три софтовых А75(форматFFS требовали).Неохота было лишний раз вскрывать резать паять(чтоб фулл слить).Хоть половина клиентов ************ки но все равно к людям надо по человечески.

[softiara]

Ну посмотрите что в логе пишет.
Incorrect Battery Voltage! 4412 mV!

R143-330K Проблемма должна быть в нем.

[valeric2]

Ну посмотрите что в логе пишет.
Incorrect Battery Voltage! 4412 mV!

R143-330K Проблемма должна быть в нем.

Это потому что от блока питания подключаю при прошивке