пришел китаец с перезагурузом K750c версия пршивы CKT26_05C_PCB01_GPRS_MT6226_S00.WOLF_1_12_SAXX0V0SP64XXC_626_RU стояла, клиент оставлять телефон не захотел забрал, через неделю принес труп с версией в нем T6226_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP_V3_F3_1, не знаю какой умник залил в него чужой фул, лил обратно родную не включается не определяет фат FFS
Initializing[6226:8A02:8A00]...
CPU: MT6226
chip: 0031:28AC:9401
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC22E000000000:29AA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:FFBFFF00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29AA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #03 in region #00...
flash: EC22E000000000:FFBFFF00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC22E000000000:29AA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: EC22E000000000:FFBFFF00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
detecting chip #02 in region #00...
flash: EC22E000000000:29AA0000000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 007Fx010000] 8Mb
it's time to stop: 290000AA18B09FA518B09FA518B09FA518B09FA518B09FA5
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information not found
detect device identification#2 finished
detecting eeprom/ffs area in 2 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC22E000000000:29AA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: EC22E000000000:FFBFFF00000000
checking area[00800000]: 00000000-007FFFFF...
eeprom/ffs found near: 00700000
Detected eeprom/ffs address is non-standard: 00700000

Posible reasons:
1. eeprom is Ok but address is non-standard
2. eeprom damaged and can't be detected
3. eeprom is Ok but detected incorrectly (f.e. unknown eeprom structure)

If you are not sure that detected address is correct:
1. press "NO" (and select standard address or terminate current operation)
2. make flash backup for emergency case
3. repeat required operation

Are you sure that detected eeprom address is correct ?
autodetected eeprom/ffs address[00700000] confirmed by user
detecting eeprom/ffs size...
eeprom/ffs size: 00900000
ffs chip: 00
eeprom/ffs area: 00000000:00700000-00FFFFFF
detecting ffs structure pass 1...
............................
can't detect fat name location
ffs element #1 detection failed
detecting ffs structure pass 2...
............................
can't detect fat name location
ffs element #2 detection failed
error: autodetection failed
Finished, time used: 68 sec
Remove/Install battery now !
народ если у кого есть EEPROM или фул, поделитесь