Nokia 6300 не прошивается

[ExpleyT]

Привет всем! Принесли тело. Зависает при вкл., только заставка Nokia. Решил прошить фениксом. При прошивки вывел ошибку - "The flashing failed. Do you like to retry the flashing".

Вот лог:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Loading image files...
Waiting for USB device. Press phone's power button (if you start from dead terminal)
ROM Boot Drivers loaded. Creating RAW connection
Connecting to device...
Connection opened
Connection opened to BootCode successfully
First wait command succeeded.
First wait command failed. Preparing for bootrom waiting loop ...
Flashing Secondary boot code: 14464 Bytes
Sending USB data: 28%
Sending USB data: 57%
Sending USB data: 85%
Sending USB data: 100%
Secondary boot loaded
Skipping USB handshake...
Flashing Update Server Data: 248320 Bytes
Sending USB data: 2%
Sending USB data: 12%
Sending USB data: 21%
Sending USB data: 31%
Sending USB data: 41%
Sending USB data: 51%
Sending USB data: 61%
Sending USB data: 71%
Sending USB data: 81%
Sending USB data: 91%
Sending USB data: 100%
Flashing PASUB TOC Data: 58304 Bytes
Sending USB data: 7%
Sending USB data: 14%
Sending USB data: 21%
Sending USB data: 35%
Sending USB data: 42%
Sending USB data: 56%
Sending USB data: 63%
Sending USB data: 70%
Sending USB data: 84%
Sending USB data: 91%
Sending USB data: 100%
Update server loaded
Waiting for Update Server to boot...
DEBUG - FUR_CONTROL_SYSTEM_INFO_REQ not supported on device. Skipping detection
Initializing Update Server....
Configuring Algorithm clients....
FUR: Adding Asic CMT as client 0x01...
FUR: PROTOCOL_CONTROL - Error sending message 0x0001 to Client 0x10 - 0x84009427
Error initializing Algorithm. 0x84009427
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
Flashing phone
Initializing
Loading image files...
Connection was already open...
Phone must be off to perform revive operation with USB
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing failed.

есть UFS&HWK Tornado 3, можно ли восстоновить телефон, обычным USB кабелем? Помогите пожалуйста! Заранее блогадарен!

[rassoft]

Если есть UFS так и шей им. Стоит заморочиваться ли через USB?

[ExpleyT]

вот в том то и дело... УФС есть, F-бас кабели нету для Nokia 6300, только для старых телефонов.Можно ли переделать как нибудь?

[rassoft]

Вот схема кабеля, может поможет

[ExpleyT]

Здесь батарейка нужна?

[ExpleyT]

Вот сделал как в схеме... И вот лог:

1ST BOOT : C0,07 [Rm-217] [2.0.9.0]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 1F30001116387B5645DCB31D6F19B60E13D28D88
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
CMT FLASH DEVICE NOT SUPPORTED by: RAP3Gv3_algo_fps8.fg, Ver: 1.12.5
Check Product, Use newer Flash Loader Pack
CMT VPP : Internal
DUAL LINE : False
CMT ALG Boot OK
IMAGE : rm217__07.21.mcusw
00000000: 04 00 00 00 00 B1 72 ......r
ERR: CMT FLASH ERASE FLB_MSG_C2: STORE_CERT CER STO
Process Failed, Repowering Mobile

че может быть?

[AndreyD]

Похоже флешку перекатывать нужно.

[JooL]

Попробуй убрать галочку с DUAL LINE, иногда помогает

[ExpleyT]

вот лог при прошивке:

1ST BOOT : C0,07 [Rm-217] [2.0.9.0]
RAPx ID : 000000010000022600010006010C192101001101
EM 1 ID : 00000232
EM 2 ID : 00000353
RAPx PBID : 1F30001116387B5645DCB31D6F19B60E13D28D88
RAPx MODE : 00
RAPx HASH : BAF3A9C3DBFA8454937DB77F2B8852B1
RAPx ROID : 191EC665DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00010041-00006A21, Amd 72NS256PD
CMT FLCNT : 00000000000000000000000000000000000000
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo.fg, Ver: 9.17.0
CMT KSIG0 : 7F7E6491E8D30494B45630BB3A8599F4E1C674C9
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm217__07.21.mcusw
CMT NOR Erase Area: 0x00000000-000006BF
CMT NOR Erase Area: 0x000006C0-0001FFFF
CMT NOR Erase Area: 0x00020000-0007FFFF
CMT NOR Erase Area: 0x00080000-000DFFFF
CMT NOR Erase Area: 0x00100000-001FFFFF
CMT NOR Erase Area: 0x00200000-0031FFFF
CMT NOR Erase Area: 0x00320000-0105FFFF
CMT NOR Erase Area: 0x01060000-01067FFF
CMT NOR Erase Area: 0x01068000-0107FFFF
CMT FLASH ERASE OK, Time: 00:49
Written: 10 Certificate(s)
CMT FLASH WRITE OK, Time: 01:28
Chip SECTOR_SIZE: 128k
Warning, Must be Used 128Kb Sector_Size CNT File
IMAGE : rm217__07.21.image_i_128
CMT NOR Erase Area: 0x01600000-01FDFFFF
CNT FLASH ERASE OK, Time: 00:24
CNT FLASH WRITE OK, Time: 00:29
IMAGE : rm217__07.21.ppm_i
CMT NOR Erase Area: 0x01080000-015FFFFF
PPM FLASH ERASE OK, Time: 00:15
BadFlashFile DATA_CS: A32A-A53B
Flashing Aborted...
Process Failed, Repowering Mobile


и выходить такая ошибка, где-то 99%. "Corrupted Flash File: rm217_07.21.ppm_i, Please Reinstall Data Package". Может я кабель нето сделал?

[ExpleyT]

Схема кабеля у меня.

[itsme]

Скачай прошивку в другом месте, возможно ppm битый. В логе так и написано ведь. Если не поможет - МЕНЯТЬ флешку, предварительно сохранив полный pm и сертификаты.

[rassoft]

Надо задействовать pin5(vpp) в простом случае соединив его с VBAT, но иногда лучше подать на vpp отдельное напряжение 4.2 вольт. Второе у тебя нет резисторов для входа в Local, поставь обязательно(по шине BSI). Возможно было бы достаточно перед тем как шить просто сделать фабричный сброс через UFS, иногда этого достаточно(без резисторов его не сделаешь, т.к. не будет входа в LOCAL)