Страница 1 из 2 12 ПоследняяПоследняя
Показано с 1 по 12 из 19

Тема: N97 ne vkluchaietsa

  1. #1
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18

    N97 ne vkluchaietsa

    prinesli na remont N97 ne vkluchaietsa tolko korotkii vibro vovremia najatia na power.
    shil prashivkoi 20.0.019 flesjitsa na ura vlokal vxodit sbrosi delaiet.no apiac ne vkluchaietsa.vot log ot cyclon.

    Код:
    MCU Version	V ICPR72_09w28.6
    MCU Date	09-09-09
    Product		RM-505
    Manufacturer	(c) Nokia
    IMEI		3542250373xxxxx
    Mastercode	255332016
    IMEI Spare	3A45220573132408
    IMEI SV		3345220573132408F6000000
    CNT		20.0.019.uda_3_001
    PSN		CUC262349
    Product Code	0577223
    Basic Product Code	0570816
    PSD		0000000000000000
    LPSN		0
    WLAN MAC	00266873855F
    APE SW		v 20.0.019
    APE Variant	v 20.0.01920.0.019.11.0120.0.019.C01.01
    APE Test		rm505ENOA09w23v0.071
    APE HW		256
    APE ADSP	256
    RETU		16
    TAHVO		22
    AHNE		11
    HW		4001
    RFIC		|Vapaus_5.1 | ???
    DSP		ICPR72_09w26
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    vot log proshivki

    Код:
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-505_354225037314288_18.02.2010_224211.SecurityBlock.PM"
    "0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC.C000097A" Exists, That is good...
    Storing Additional Data...
    Checking Superdongle Key...
    Superdongle Store Problem -> Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
    Checking CMLA Key...
    CMLA Key Store Problem -> Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Testing TX2 Line...
    TX2 Line OK!
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Backing up simlock...
    MCU Version	V ICPR72_09w28.6
    MCU Date	09-09-09
    Product		RM-505
    Manufacturer	(c) Nokia
    IMEI		354225037314288
    Mastercode	255332016
    Simlock backup OK, saved to RM-505_354225037314288_18.02.2010_224230.SLBackup.PM
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing RM-505_20.0.019_prd.core.C00 (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    RM-505_20.0.019_prd.core.C00, Type: Flash Image, Algo: XSR 1.5, BB5
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
    EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
    EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
    EraseArea[0,CMT]: 0x00D60000-0x0AB9FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.906s
    Writing all blocks...
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT SOS*UPDAPP Certificate...
    Writing CMT SOS*DSP0 Certificate...
    Writing CMT SOS*ISASW Certificate...
    Writing CMT SOS+CORE Certificate...
    Writing CMT SOS+ROFS1 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 133.891s
    Restarting MCU...
    Processing RM-505_20.0.019_prd.core.C00 (APE)...
    Processing RM-505_20.0.019_prd.rofs2.V11 (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    RM-505_20.0.019_prd.rofs2.V11, Type: Flash Image, Algo: XSR 1.5, BB5
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x070A0000-0x09C9FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.250s
    Writing all blocks...
    Writing CMT SOS+ROFS2 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 29.453s
    Restarting MCU...
    Processing RM-505_20.0.019_prd.rofs2.V11 (APE)...
    Processing RM-505_20.0.019_C01_prd.rofs3.fpsx (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    RM-505_20.0.019_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x09CA0000-0x0AB9FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.93s
    Writing all blocks...
    Writing CMT SOS+ROFS3 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 0.109s
    Restarting MCU...
    Processing RM-505_20.0.019_C01_prd.rofs3.fpsx (APE)...
    Processing RM505_507_20.0.019_uda_3_001.uda.fpsx (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    RM505_507_20.0.019_uda_3_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0ABA0000-0x0F71FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.406s
    Writing all blocks...
    Programming Status OK!
    All blocks written OK! Time taken 11.813s
    Restarting MCU...
    Processing RM505_507_20.0.019_uda_3_001.uda.fpsx (APE)...
    Processing rm505ENOA09w23v0.071.fpsx (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006400C192101031103
    CMT_EM_ASIC_ID:		00000296
    CMT_EM_ASIC_ID:		00000B22
    CMT_PUBLIC_ID:		0EF0000DBCDA0158DAAD910EE453FEB3E6957DDC
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	CAEEBB65D3C48E6DC73B49DC5063A2EE
    CMT_BOOT_ROM_CRC:	4B9B7510
    CMT_SECURE_ROM_CRC:	3E691FF8
    rm505ENOA09w23v0.071.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
    RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x00EC004000400121, Samsung, ONENAND
    FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.31s
    Writing all blocks...
    Writing CMT SOS*ENO Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 3.687s
    Restarting MCU...
    Processing rm505ENOA09w23v0.071.fpsx (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    MCU Version	V ICPR72_09w28.6
    MCU Date	09-09-09
    Product		RM-505
    Manufacturer	(c) Nokia
    IMEI		354225037314288
    Mastercode	255332016
    IMEI Spare	3A45220573132408
    IMEI SV		3345220573132408F6000000
    CNT		20.0.019.uda_3_001
    PSN		CUC262349
    Product Code	0577223
    Basic Product Code	0570816
    PSD		0000000000000000
    LPSN		0
    WLAN MAC	00266873855F
    APE SW		v 20.0.019
    APE Variant	v 20.0.01920.0.019.11.0120.0.019.C01.01
    APE Test		rm505ENOA09w23v0.071
    APE HW		256
    APE ADSP	256
    RETU		16
    TAHVO		22
    AHNE		11
    HW		4001
    RFIC		|Vapaus_5.1 | ???
    DSP		ICPR72_09w26
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!
    podskajite gde kopac pajalosta

    zaranii spasibo

  2. #2
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    vot self test sdelanni toje cyclonom

    Код:
    Selftests to proceed: 51
    Passed		ST_TAHVOINT_TEST
    Passed		ST_UEM_CBUS_IF_TEST
    Passed		ST_EAR_DATA_LOOP_TEST
    Passed		ST_SIM_CLK_LOOP_TEST
    Passed		ST_SIM_IO_CTRL_LOOP_TEST
    Passed		ST_SIM_LOCK_TEST
    Failed		ST_SECURITY_TEST
    Passed		ST_PWR_KEY_TEST
    Passed		ST_CURRENT_CONS_TEST
    Passed		ST_BACKUP_BATT_TEST
    Passed		ST_HOOKINT_TEST
    Passed		ST_BTEMP_TEST
    Passed		ST_MBUS_RX_TX_LOOP_TEST
    Passed		ST_AMB_LIGHT_SENSOR_TEST
    Passed		ST_FMTX_TEST
    Failed		ST_DIGIMIC_TEST
    Passed		ST_EXT_DEVICE_TEST
    Passed		ST_CDSP_SLEEPCLK_FREQ_TEST
    Passed		ST_CDSP_SLEEPCLOCK_FREQ_TEST
    Passed		ST_CDSP_RF_BB_IF_TEST
    Passed		ST_CDSP_RF_SUPPLY_TEST
    Passed		ST_CDSP_TX_IQ_TEST
    Passed		ST_CDSP_TXC_DATA_TEST
    Passed		ST_CDSP_RX_PLL_PHASE_LOCK_TEST
    Passed		ST_CDSP_TX_PLL_PHASE_LOCK_TEST
    Passed		ST_CDSP_WCDMA_TX_POWER_TEST
    Passed		ST_CDSP_RX_IQ_LOOP_BACK_TEST
    Passed		ST_CDSP_GSM_TX_POWER_TEST
    Passed		ST_KEYBOARD_STUCK_TEST
    Passed		ST_LPRF_IF_TEST
    Passed		ST_CAMERA_IF_TEST
    Passed		ST_CAMERA_ACCELERATOR_TEST
    Passed		ST_SEC_CAMERA_IF_TEST
    Passed		ST_LED_FLASH_TEST
    Passed		ST_CAMERA_AUTOFOCUS_TEST
    Passed		ST_LPRF_AUDIO_LINES_TEST
    Passed		ST_MAIN_LCD_IF_TEST
    Passed		ST_TOUCH_STUCK_TEST
    Passed		ST_BT_WAKEUP_TEST
    Passed		ST_WLAN_TEST
    Passed		ST_BT_WLAN_COEXISTENCE_TEST
    Passed		ST_MASS_MEMORY_IF_TEST
    Passed		ST_TOUCH_IF_TEST
    Passed		ST_ACCEL_IF_TEST
    Passed		ST_LCD_CONTROLLER_TEST
    Passed		ST_VIBRA_TEST
    Passed		ST_USB_LOOP_TEST
    Passed		ST_RADIO_TEST
    Passed		ST_TVOUT_IF_TEST
    Passed		ST_IO_EXPANDER_IF_TEST
    Passed		ST_MAGNETOMETER_TEST
    Selftests done, Tests total: 51, Tests passed: 49, Tests not passed: 2
    viruchaite rebiata

  3. #3
    Moderator Аватар для uo5oq
    Регистрация
    14.01.2004
    Адрес
    .
    Сообщений
    21,088
    Спасибо
    778
    Благодарностей: 8,167 : 3,245
    Цитата Сообщение от datiko1 Посмотреть сообщение
    vot self test sdelanni toje cyclonom

    Код:
    Selftests to proceed: 51
    
    
    Failed		ST_SECURITY_TEST
    Failed		ST_DIGIMIC_TEST
    
    Selftests done, Tests total: 51, Tests passed: 49, Tests not passed: 2
    viruchaite rebiata
    Странноватый результат.
    Похоже на повреждение SDD.
    Но при повреждении SDD, телефон должен включаться.
    И микрофон непонятно при чём тут.

    А почему Вы записали не самую последнюю SW ?
    Запишите эту: N97_RM-505_21.0.045

  4. Спасибо сказали:

    datiko1 (20.02.2010)

  5. #4
    Mega Member Аватар для weaver
    Регистрация
    20.12.2005
    Адрес
    Che
    Сообщений
    1,999
    Спасибо
    417
    Благодарностей: 788 : 249

  6. #5
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от uo5oq Посмотреть сообщение
    Странноватый результат.
    Похоже на повреждение SDD.
    Но при повреждении SDD, телефон должен включаться.
    И микрофон непонятно при чём тут.

    А почему Вы записали не самую последнюю SW ?
    Запишите эту: N97_RM-505_21.0.045
    bila 12 versia ia zalil 20 esli nado i magu zalic 21

  7. #6
    Moderator Аватар для uo5oq
    Регистрация
    14.01.2004
    Адрес
    .
    Сообщений
    21,088
    Спасибо
    778
    Благодарностей: 8,167 : 3,245
    Цитата Сообщение от datiko1 Посмотреть сообщение
    bila 12 versia ia zalil 20 esli nado i magu zalic 21
    Вы не написали, что была 12-я.
    Тогда особого смысла писать 21-ю нет, но попробуйте и очень желательно JAF-ом по USB.

  8. Спасибо сказали:

    ajab_ctt (06.05.2010)

  9. #7
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от uo5oq Посмотреть сообщение
    Вы не написали, что была 12-я.
    Тогда особого смысла писать 21-ю нет, но попробуйте и очень желательно JAF-ом по USB.
    ok zavtra poprobuiu jafom sha doma u menia net jafa.
    no ia ego shil phenix om po usb rezultata net

  10. #8
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от uo5oq Посмотреть сообщение
    Странноватый результат.
    Похоже на повреждение SDD.
    Но при повреждении SDD, телефон должен включаться.
    И микрофон непонятно при чём тут.

    А почему Вы записали не самую последнюю SW ?
    Запишите эту: N97_RM-505_21.0.045
    zabil skazac universalboxom sdelal chek superdongle i universal govorit super donglom vse vpariadke daje sx4 avtorizaciu proxodit

  11. #9
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от uo5oq Посмотреть сообщение
    Вы не написали, что была 12-я.
    Тогда особого смысла писать 21-ю нет, но попробуйте и очень желательно JAF-ом по USB.
    prashil jafom cherez usb rezultata net

  12. #10
    Moderator Аватар для uo5oq
    Регистрация
    14.01.2004
    Адрес
    .
    Сообщений
    21,088
    Спасибо
    778
    Благодарностей: 8,167 : 3,245
    Цитата Сообщение от datiko1 Посмотреть сообщение
    prashil jafom cherez usb rezultata net
    Думаю железо всё же.
    Но есть ещё 2 программных варианта:

    Вариант 1
    - Записать ENO файл (если есть такой для N97)

    Вариант 2
    - С помощью MX-KEY сделать все Бэкапы (full RPL, full PM)
    - Полностью стереть телефон (до состояния даже неморгания)
    - Записать самую новую SW
    Прочесть INFO и показать тут.

  13. Спасибо сказали:

    datiko1 (20.02.2010)

  14. #11
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от uo5oq Посмотреть сообщение
    Думаю железо всё же.
    Но есть ещё 2 программных варианта:

    Вариант 1
    - Записать ENO файл (если есть такой для N97)

    Вариант 2
    - С помощью MX-KEY сделать все Бэкапы (full RPL, full PM)
    - Полностью стереть телефон (до состояния даже неморгания)
    - Записать самую новую SW
    Прочесть INFO и показать тут.
    mx-key netu no ia delal bacuk cyclonom delal full ereis zalival prashivku no daje ne morgaiet
    prosto pri vkluchenii vibro i vse daje ekran ne zagaraietsa tolko vibriruet.proshival deed usb cherez phonix.rezultat nulevoi.atdelno ENO fail ne pisal no kagda phonix om proshival smotrel i on proshil 4 faila vtom chisle i eno.
    fail etot s eno om v meste proshivkoi zalil
    Вложения Вложения

  15. #12
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    ia vot shto podumal
    aparat privizen sdubaia unas set magazinov sami privozim on kak privizli srazu ne rabotal toest vibriroval tolko.ssamogo nachala bil takov ne tapili ne kidali ! dumaiu mojet bit takoe shto na bumajke napisanno rm-505 a na samom dele drugoi rm.kanechno poka nachel ia ego shic smatrel info telefona spomochu programami hwk universalbox cyclon vse ani vidavali info rm-505. no vseravno dumaiu mojet drugoi rm vnutri plata a ashibochna ssamogo nachala zalili rm-505.vafshe est takie aparati adinakovo viglidiat a vnutri rm drugoi ???

    spasibo vsem zaranii

Похожие темы

  1. w205 ne vkluchaietsa
    от datiko1 в разделе SeTooL - официальный форум
    Ответов: 10
    Последний ответ: 19.05.2010, 18:52
  2. w205 ne vkluchaietsa
    от datiko1 в разделе SeTooL - официальный форум
    Ответов: 17
    Последний ответ: 12.04.2010, 16:15
  3. D780 ne vkluchaietsa
    от datiko1 в разделе Samsung аппаратный ремонт
    Ответов: 2
    Последний ответ: 05.02.2010, 15:40
  4. N97 ne vkluchaietsa
    от datiko1 в разделе Телефоны BB5
    Ответов: 3
    Последний ответ: 26.10.2009, 17:51

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru