Добрый вечер. Canon IXUS 60 (PC1193) в режие просмотра не работают кнопки - в режиме фото все работает норм. Думаю по прошивке. Нашел какую-то прошивку, но -
" - Press your "Set" button, hold it down. While holding down your "Set" button press your "Display" button. You will see the version of the firmware in your camera. Confirm that it is the right firmware to match up with the CHDK that you downloaded. Your real firmware version is NOT 1.0.1.0 nor 1.0.0.0 Your REAL firmware version will look something like: "Firmware Ver GM1.00A". (Pressing "Display" again a few times while still holding down your "Set" button will let you see even more information about your camera, including total number of shots taken since it was made.)
То есть без рабочих кнопок я ее не залью... ?