Дали прошить нокию 5610d-1 RM-242, т.к. сильно глючит. Прошил через Phoenix прошивкой 10.00. Сначала нормально включался, но периодически перезагружался. Решил прошить еще раз той же прошивкой через Phoenix, но на половине прошивки телефон отключился от компьютера. После этого перестал входить в flash mode.
Лог JAF'a через обычный USB:
Код:
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
Elf2flash 07.14.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...........................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Phone failed to boot in flash mode CMT...
Лог Phoenix'a:
Код:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Starting to recover the phone
Recoverying phone
Initializing
ERROR: Failed to set phone to flashmode
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted
Иногда еще вот так:
Код:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 14592 bytes
Secondary boot loaded
Loading update server code: 294144 bytes
Update server loaded
Starting to recover the phone
Recoverying phone
Initializing
Error initializing Algorithm. 0x84009427
ERROR: Failed to set phone to flashmode
Scanning image files...
Unable to set the phone to flash mode. Unable to flash.
All operations completed
Product flashing aborted