Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : RM482_APE_ONLY_09w23v0.040.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 17200006FA6703447A650BE19BDBE25D09A23F9A
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:00
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 35...7031120232
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\Администратор\Рабочий стол\UpenGown\Best_v1.10.1\Best\Backup\Cert\355217031//20232_CRT_2nd.rpl
===Flashing [MCU]===
Erase : Processing RM482_APE_ONLY_09w23v0.040.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing RM482_APE_ONLY_09w23v0.040.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 12 blocks
TIME : Write time : 00:00:00
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:00
Reboot phone now...
Phone disconected!
Connect phone on selected interface...
-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:01:57
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm482_034.001_prd.core.fpsx
PPM : rm482_034.001_36.01_Russian2_prd.rofs2.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 17200006FA6703447A650BE19BDBE25D09A23F9A
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg
Boot Done! :)
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 355217031120232
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Cert Read done!
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\Documents and Settings\Администратор\Рабочий стол\UpenGown\Best_v1.10.1\Best\Backup\Cert\3552170220232_CRT_2nd.rpl
===Flashing [MCU]===
Erase : Processing rm482_034.001_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm482_034.001_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 422 blocks
TIME : Write time : 00:00:17
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
===Flashing [PPM]===
Erase : Processing rm482_034.001_36.01_Russian2_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm482_034.001_36.01_Russian2_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 129 blocks
TIME : Write time : 00:00:05
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:23
Reboot phone now...