Доброго времени суток!

подскажите пожалуйста, 6700 не прошивается через UFS+HWK, MT-BOX решил попробовать фениксом (читал тут на форуме, что проблемы с тошибовской флехой только с программаторами, а феникс шьёт их)
вот лог:

Код:
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
Loading update server code: 824803 bytes
Update server loaded
Erasing....
Erasing complete
Asic CMT: Start programming 58628 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Starting to recover the phone
Recoverying phone
Initializing
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
Scanning image files...
ERROR: Unable to detect device 0x8401F145. Check USB connection!
ERROR: Product recovery failed!
Unable to set the phone to flash mode. Unable to flash.
Starting to recover the phone
Recoverying phone
Initializing
Scanning image files...
Phone recovery completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product
Verifying communication to product (before flash finalizing) 
Communication verified
Verifying communication to product (before flash finalizing) 
Failed to verfy communication to product