RIFF Box JTAG - обновления, новости сервера

[LASDORF]

31.12.2011
RIFF Box JTAG:



Firmware 1.30
---------------------------

- improved HALT algorithm for ARM11 fused (JTAG disabled) cores for cases when core exits reset till the moment when JTAG is enabled by running firmware code

[DB2020_Logs]

Samsung S5670 resurrection is simple. Make sure to hold Power On button during JTAG connection establishing phase.

To resurrect Samsung S5670 do this:

• Solder JTAG cable to Samsung S5670 JTAG pads;
• Insert battery and connect USB cable to phone and PC;
• Make sure Samsung S5670 is selected in the list of models;
• Click Resurrect button;
• Press Power On key on the phone;
• Wait few seconds until software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;

[hELLISh]

RIFF Box Torrent tracker beta test !

Hello,
First, this is MAINLY for users with slow or bad internet connection. We have prepared torrent tracker and seed box, so hopefully users who experience problems with regular update download, can benefit from this.

Requirements :

- RIFF Box tracker account
- Torrent client
- Some free time to waste

Once You register and activate Your account, You can log in and browse torrents. At the moment, there is single torrent file, containing all current resurrectors DLL-s released by now.

Now, install uTorrent client (if You already don't have one) and do some settings first :

- Location of downloaded files : "C:\Program Files\RIFF Box JTAG Manager" (Or any other folder from where You run JTAG Manager exe)
- Open downloaded Torrent file and confirm download location
- Select files which You want to download

Keep in mind :

- JTAG Manager should be closed while You download files with torrent client
- Torrent client should be closed while You work with JTAG Manager

Since this is JUST test, things may not work well, so please report ANY kind of errors You may encounter.

Источник.

[shilopopic]

RIFF JTAG получил очередное обновление в виде поддержки реанимации и восстановления загрузчика модели HTC ThunderBolt 4G ADR6400 (HTC Mecha).

В этом обновлении RIFF JTAG:

- Реализована поддержка моделv HTC ThunderBolt 4G ADR6400 (HTC Mecha)

Доступны операции:

- реанимация;
- восстановление поврежденного загрузчика.

[gaz2402]

Whats new:

Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !

Following models are supported at the moment:
HTC Desire HD (HTC Ace)
HTC Desire S (HTC Saga)
HTC Desire Z (HTC Vision)
HTC Flyer 3G
HTC Flyer WiFi
HTC Evo View 4G
It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:



Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
Launch JTAG Manager, select appropriate Model DLL and click desired button
Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
If required, repeat the procedure (sometimes required if device is connected for first time)
We will release USB support for rest of the models on these CPU-s in following days.
To download and install new updates – simply click “Check for Updates” button on Box Service TAB.

Источник-http://forum.gsmhosting.com/vbb/f475...orted-1464880/
Офсайт-http://www.jtagbox.com/jtag-news/rif...support-added/

[gaz2402]

•HTC Thunderbolt USB support added
•HTC Sensation XL USB support added
•HTC Inspire USB support added
•HTC Incredible S USB support added
•HTC Incredible 2 USB support added
These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.

Please visit RIFF FAQ section to see how to install drivers, and how to find eMMC Vdd test points:

Источник-http://www.jtagbox.com/jtag-news/rif...nes-supported/

[DB2020_Logs]

RIFF JTAG-RIFF JTAG Manager v1.43

Скачать >>>

This will install following files to Your computer:

• JTAG Manager software v1.43
• RIFF Box Firmware v1.32
• RIFF Box control port driver
• RIFF Box update port driver
• RIFF DCC USBLoader driver
• QUALCOMM QHUSB_DLOAD driver

After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.

[Svoyak]

Перевод:

Обновлено в ПО RIFF JTAG Box:

Данное обновление инсталлирует следующие файлы и приложения на Ваш ПК:

JTAG Manager software версии 1.43
RIFF Box Firmware версии 1.32
Драйвер контрольного порта RIFF Box
Драйвер порта обновления RIFF Box
Драйвер RIFF DCC USBLoader
Драйвер QUALCOMM QHUSB_DLOAD

Во время установки указанные приложения и файлы записываются в указанную папку и запускается скрипт установки драйверов. Помните, что если Вы используете ОС Windows XP, Вам потребуется указать местоположение файлов драйверов при первом подключении устройств.

[Pasha T.2]

Драйвера для RIFF Box и HTC USB с автоматической установкой.
Вам больше не потребуется указывать местоположение файлов драйверов при первом подключении устройств.

При возникновении проблем с установкой драйверов обращайтесь в Л.С.

Прямая ссылка - Скачать RiFFBOX_2012_drivers_Pasha.T.exe

[gaz2402]

Whats new:
Samsung B7320 unbrick/boot repair support added
HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
HTC Sensation (PG581300/PG583101) Unlock support added
HTC Evo 3D Unlock support added
Bug Fix updates:
HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)

HTC Wildfire S Proximity sensor fix

Please click “Check for updates” button in RIFF JTAG Manager to download new files.

Подробнее здесь-http://forum.gsmhosting.com/vbb/f475...dates-1477276/

[zarifjan88]

RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported

Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.

.To resurrect HTC Surround (PD26100):
.Solder JTAG cable to HTC Surround JTAG pads;
.Insert USB Data cable into board and PC;
.Make sure HTC Surround (PD26100) is selected in the list of models;
.If you use battery, press Power On key;
.Click Resurrect button;
.Wait till software signals a successful operation completion;
. Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:
.Disconnect PC cable;
.Insert battery;
.Hold ‘Volume Down’ key and press ‘Power ON’ button.


www.jtagbox.com

[DB2020_Logs]

31.05.2012 RIFF JTAG – HTC One V T320e (HTC Primo) Unbrick, Unlock, SuperCID, IMEI Repair supported

Repairing bricked HTC OneV (PK76100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Current resurrector works via USB interface thus no JTAG connection is required. You may need to install RIFF BOX DCC Loader USB Interface USB driver if you run this for the first time. Drivers are located in JTAG Manager directory (Drivers folder).
In order to connect, device must be detected by system as Qualcomm HS-USB QDLoader communication port. To force device into this mode (that is if your device is dead but there is still no USB activity when you connect it to PC with USB cable) use testpoint to disable the eMMC memory – for this shortcut specified point on the schematics to the GND during power-on stage.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.16.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PK7610000’.
There is option to reflash android BOOT and RECOVERY zones.
To resurrect HTC OneV via USB Cable:
If required, use testpoint to force HS-USB QDLoader mode: for this de-power board, shortcut specified point in the schematics to GND with the help of a needle, attach battery and then insert USB cable into PC, wait while phone enumerates as HS-USB QDLoader and then remove the needle;

• Make sure HTC OneVC (PK76100) is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. You can use CWM recovery to flash any ZIP file – for this during resurrection add BOOT & RECOVERY zones to be resurrected too.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ key and press ‘Power ON’ button.