Nokia 2690 после водички, нет подсветки, нокиа и выкл, шьтся в локал не падает, воды было очень мало, N2300 N2000 N2200 драйвер подсветки заменены на заведомо исправные
Код:
Core version : 1.20 , Rev : 4.0
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm635__10.10.mcusw
PPM : rm635__10.10.ppm_el
CNT : rm635__10.10.image_el_black
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 0FF0010985820256CA2ACA177E17A913097732A6
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm635__10.10.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:37
Write : Processing rm635__10.10.mcusw
Total 1165 [1165/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:00:57
MCU Write done
===Flashing [PPM]===
Erase : Processing rm635__10.10.ppm_el
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:03
Write : Processing rm635__10.10.ppm_el
Total 182 [182/0/0] blocks to write, writing...
TIME : Write time : 00:00:09
PPM Write done
===Flashing [CNT]===
Erase : Processing rm635__10.10.image_el_black
Found 2 areas to erase
Erasing area 0x01DC0000 - 0x0215FFFF, NOR, CMT
Result: 0000
Erasing area 0x02160000 - 0x03FBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:04:48
Checking content info...
Check Image : Content size is 128k, use direct write mode
Write : Processing rm635__10.10.image_el_black
Total 424 [424/0/0] blocks to write, writing...
TIME : Write time : 00:00:21
CNT Write done
ADL : End flashing
Flashing done!
Total flash time : 00:09:56
Reboot phone now...
-> Flashing Failed! :( Maybee HW error, or Downgrade try???!
Anyway - try reinsert battery and PowerUp phone manualy
Connect phone on selected interface...
Done!
Elapsed: 00:11:59
Connect phone on selected interface...