Точно такой же аппарат:
Воскрешение
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S5230]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 2.98V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
Конект
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S5230]
Connecting to the dead ************...OK
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Model selected: SAMSUNG - Samsung S5230
Detected dead ************ ID: 0x07926F0F
Таргер резет
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S5230]
Resetting target...OK
STATUS: Target is halted.
R0 = 0x00126C8C R6 = 0x00000000 R12 = 0x00000000
R1 = 0x00008000 R7 = 0x00000000 R13 = 0x08703C00
R2 = 0x00010001 R8 = 0x00000000 R14 = 0x0000027C
R3 = 0x00000000 R9 = 0x00000000 R15 = 0x0000028C
R4 = 0x00002FDE R10 = 0x00000000 CPSR = 0x800000D3
R5 = 0x00000000 R11 = 0x00000000
Таргер гоу
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.24, JTAG Manager Version: 1.32
Selected Resurrector: [Samsung S5230]
Target GO from PC = 0x00100000...OK
фулл так же не лёьтся