Nokia 6720 Phone startup faild. Contact the retailer.

[_YORK_]

Всем доброго времени суток! Клиент сказал телефон слегка упал! После прошивки загорается Nokia, несколько секунд и тухнет.
Вот логи BEST:

Скрытый текст: Показать

Files Set for Flashing :
MCU : rm424_031.022_prd.core.fpsx
PPM : rm424_031.022_05.01_Russian_prd.rofs2.fpsx
PPM2 : rm424_031.022_C08.01_GREY_prd.rofs3.fpsx
CNT : rm424_A_10w20v0.010.fpsx
APE : rm424_031.022_U002.000_prd.uda.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 12B0010A7C6903448CF84189ED8CAEAE020B3148
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D1302023398943E01BE04F38DE05BC5497BDABC5
ADL: phone is in flash mode

Backup enabled, will read all certificates...
Reading NPC certificate...
IMEI : 353213033242936
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353213033242936_CRT_2nd.rpl

===Flashing [MCU]===
Erase : Processing rm424_031.022_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm424_031.022_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 374 blocks
TIME : Write time : 00:00:16
MCU Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM]===
Erase : Processing rm424_031.022_05.01_Russian_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm424_031.022_05.01_Russian_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 198 blocks
TIME : Write time : 00:00:09
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [PPM2]===
Erase : Processing rm424_031.022_C08.01_GREY_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm424_031.022_C08.01_GREY_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 19 blocks
TIME : Write time : 00:00:00
PPM Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [CNT]===
Erase : Processing rm424_A_10w20v0.010.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm424_A_10w20v0.010.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 11 blocks
TIME : Write time : 00:00:00
CNT Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

===Flashing [APE]===
Erase : Processing rm424_031.022_U002.000_prd.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm424_031.022_U002.000_prd.uda.fpsx
Total writen 3 blocks
TIME : Write time : 00:00:00
APE Write done
ADL: Request programm status
NAND status : 00000001 / 00000001 / 00000000

ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Flashing done!
Total flash time : 00:00:29
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 6720
Software Info: V ICPR82_10w07.2 24-02-10 RM-424 (c) Nokia
IMEI: 353213033242936
Product code: 0568206
Checking...
SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Product code update...
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:00:49
Connect phone on selected interface...

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom :( Try again...
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm, RAPIDO

Backup Certificates now...
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 12B0010A7C6903448CF84189ED8CAEAE020B3148
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D1302023398943E01BE04F38DE05BC5497BDABC5
ADL: Reading certificates...

Reading NPC certificate...
IMEI : 353213033242936
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!

ADL: Reading certificates done! :)
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
CRT308 Backup Created
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : c:\InfinityBox\BEST\Backup\Cert\353213033242936.rpl

All done, Disconnecting

Elapsed: 00:00:11
Connect phone on selected interface...


Phone found!
Series 60 Device detected!
read info... - Ok

Repair SL procedure started...

Phone Imei: 353213033242936

- > Power Off phone, dissconnect it and connect

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID: 12B0010A7C6903448CF84189ED8CAEAE020B3148
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
Fetching data, wait...

- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Bootrom Ok!
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 12B0010A7C6903448CF84189ED8CAEAE020B3148
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 11.34.0
Processing RAWLOADER...
FLIC : 00400020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 11.34.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : D1302023398943E01BE04F38DE05BC5497BDABC5
ADL: Close_Session
Content: 000300000000010000000100000000
ADL: Reboot

Wait, reconneting...

rap= 12B0010A7C6903448CF84189ED8CAEAE020B3148
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 558208C62E8407158A62DC9DF9FDB7072BFA5A34

Key file updated...

Check phone mode...
Phone in Local mode
Seting Test mode... wait...
Phone disconected!

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Test mode set
Writing SimLock Data... Error
Repair fail...! ( SL3 phone? )

Initializing Tests...
IMEI : 353213033242936 , Phone : RM-424 Nokia 6720
Get keys...
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
->ERROR | ST_SIM_LOCK_TEST
->ERROR | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
PASSED | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_KELVIN_BATVOLTAGE_TEST
PASSED | ST_KELVIN_VIBRA_TEST
PASSED | ST_KELVIN_CAPACITOR_TEST
PASSED | ST_KELVIN_MISC_TEST
PASSED | ST_KELVIN_CHARGING_TEST
PASSED | ST_KELVIN_AUDIO_TEST
PASSED | ST_KELVIN_XEAR_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_USB_CHARGING_TEST
PASSED | ST_DIGIMIC_TEST
PASSED | ST_SLEEP_X_LOOP_TEST
PASSED | ST_LED_CONTROLLER_TEST
UNKNOW | ST_CDSP_SLEEPCLOCK_FREQ_TEST
NOT EXECUTED | ST_CDSP_RF_BB_IF_TEST
NOT EXECUTED | ST_CDSP_RF_SUPPLY_TEST
NOT EXECUTED | ST_CDSP_TX_IQ_TEST
NOT EXECUTED | ST_CDSP_TXC_DATA_TEST
NOT EXECUTED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
NOT RUN | ST_CDSP_WCDMA_TX_POWER_TEST
NOT RUN | ST_CDSP_RX_IQ_LOOP_BACK_TEST
NOT RUN | ST_CDSP_GSM_TX_POWER_TEST
PASSED | ST_KEYBOARD_STUCK_TEST
PASSED | ST_LPRF_IF_TEST
PASSED | ST_CAMERA_IF_TEST
PASSED | ST_SEC_CAMERA_IF_TEST
PASSED | ST_LPRF_AUDIO_LINES_TEST
PASSED | ST_MAIN_LCD_IF_TEST
PASSED | ST_BT_WAKEUP_TEST
PASSED | ST_ACCEL_IF_TEST
PASSED | ST_VIBRA_TEST
NOT RUN | ST_USB_LOOP_TEST
PASSED | ST_RADIO_TEST
PASSED | ST_TVOUT_IF_TEST
PASSED | ST_MAGNETOMETER_TEST
SelfTests end
Done!

Elapsed: 00:07:32

Как понял надо RPL заказывать, не пинайте сильно, по софту новичек, железо в основном....
За ранее выражаю благодарность....

[DJ_TON]

Пропаивать пробовал?
из-за отвала проца\флеши тоже бывают подобные

SimLock status : SimLock Damaged!!!!! :(
Security status : Security Damaged!!!!! :(

пропаять, затем пробовать снова восстанавливать программно.

Ещё было бы удобнее разбирать твой лог, если бы разделил его нажатиями кнопок в проге\операциями:).

[TLS 358]

->ERROR | ST_SIM_LOCK_TEST
->ERROR | ST_SECURITY_TEST
Заказ RPL.

[vadimKol]

->ERROR | ST_SIM_LOCK_TEST
->ERROR | ST_SECURITY_TEST
Заказ RPL.

RPL заказать всегда можно, но дорого

для начала пропаять, лучше отреболить, если не помогло
сделать все бекапы на всякий случай
стирать шить должен включится, но будет перегружаться примерно даждые 3 мин.

тогда только заказывать RPL

[uo5oq]

Бэкапы до пропайки ничего не дадут. SLD нету.
А вот пропайка может что-то и исправит.
Ежели после пропайки SLD так же будет SimLock status : SimLock Damaged!!!!! :(
- то однозначно заказ RPL

[vadimKol]

Бэкапы до пропайки ничего не дадут. SLD нету.

бекапы нужны будут если заказчик откажется от ремонта (скажет дорого)

[genaVL]

Все дружно ждем 1 декабря! Если локальный unlock появится,то и восстановление поврежденной SLD на SL3 тоже вполне реально могут сделать.

[Sergey_NetFox]

Все дружно ждем 1 декабря! Если локальный unlock появится,то и восстановление поврежденной SLD на SL3 тоже вполне реально могут сделать.

пардон за оффтоп, но восстановление слд будет для какого продукта?

[kwb]

пардон за оффтоп, но восстановление слд будет для какого продукта?

обещали ..циклон..за ним мх бох

[uo5oq]

пардон за оффтоп, но восстановление слд будет для какого продукта?

Ветер дует со стороны MX-KEY.
Если хоть 1-н продукт это сделает standalone, то через час будет во всех остальных, а через неделю ремонт SLD SL3 будет стоить пол-пива.