Все привет.
После стирания RIFFом
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.42
Selected Resurrector: [Samsung S8500 V1.00]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz
Settings Code: 0x05011000000000000000000020000000
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Erasing FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF...OK
Completed in 00:00:05.167 (Average Transfer Rate: 101468.55 kB/s)
Восстанавливаю бут
Код:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.42
Selected Resurrector: [Samsung S8500 V1.00]
Connecting to the dead ************...OK
Detected dead ************ ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead ************...OK
Resurrection complete!
Но после этого не входит в Download mode.
Единственный вариант - залить фулл. Фулл заливается и без проблем входит в download mode. Но тут есть проблема в том что тело не загружается, не дошивается.
Хотел на чистую прошить на чистую флешку, но не смотря на "удачный" резурект не входит в DM