Platform: Samsung Android
Selected port: COM117
Selected model: GT-I9300
Searching for phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on device is turned on.
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM116
Port is busy
No diagnostic ports found!
Connecting to phone on COM117
Searching for phone. Please wait...
Phone found.
Firmware compiled date: Sun May 13 06:50:29 KST 2012
Android version: 4.0.4 (IMM76D)
Old IMEI: Unknown
New IMEI: 35XXXX-XX-XXXXXX-8
Erasing old IMEI. It can take some time. Please wait...
Creating NVM backup
Backup saved as C:\Program Files\GsmServer\OctopusSamsung
\BACKUP\NVDATA-GT-I9300-31-08-2012_12-40-44-.nvm file
Old IMEI was erased successfully.
Phone will restart now
After phone being rebooted and powered on perform the following
steps:
1. Disconnect USB cable.
2. Go to dial window.
3. Enter *#9090# number.
4. Set speed to 115200.
5. Connect phone via UART cable to Box.
Connecting to phone, please wait...
Phone connected successfully
Deactivating MSL...
MSL deactivate successfully
Please conect phone to USB cable
Searching for phone. Please wait...
Phone found.
Writing security protection...
Security protection write successfully.
Phone will restart now
Searching for phone. Please wait...
Phone found.
Writing new phone IMEI...
Phone will restart now
New IMEI successfully written.
Please, restart phone to apply changes